RADIATOR GROUP 7N6787 - Caterpillar

6V-2150 Starting/Charging Analyzer Group
Illustration 1 g01289614
(1) Case
(2) Base
(3) Cable assembly
(4) Packing set
(5) Instruction Features of the 6V-2150 Starting/Charging Analyzer Group
Cable Connector - A plug from the analyzer fits into a diagnostic connector. The diagnostic connector is normally in the engine area near the starter. The diagnostic connector can be located inside the cab.Operation - Less than five minutes are needed in order to connect the analyzer for completing the test of the starting and charging system if a machine can start without assistance. More time is required for a machine that needs to be jumped.Power supply - The power that is used in order to operate the analyzer comes through the diagnostic connector from the vehicle electrical system.Rugged - The analyzer is designed in order to conform to various accuracies in field service conditions.Convenient - The analyzer is easy to use.The operation of the analyzer is convenient. The following tasks do not need to be performed:
Remove sheet metal.
Look for components or test points in a circuit
Understand a voltmeter reading.
Have more than one person in order to test a machine.Less Downtime - The use of the analyzer results in less downtime of the machine. This is possible as the tests that are performed by the analyzer are performed easily. When the analyzer is used in an inspection, the analyzer can identify parts that have an unnoticed defect. Finding and correcting defects early can help in the prevention of future unscheduled downtime.