RADIATOR GROUP 9J0611 - Caterpillar

Failure to comply to the rated load can cause possible personal injury or attachment damage.Review the rated load of a particular attachment before performing any operation. Make adjustments to the rated load as necessary.
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.The rated operating load is defined by the least amount of weight of the following conditions.
50 percent of the full turn static tipping load
The minimum lift capacity
The minimum tilt capacityThe placement height (ground line to the chain hook) and reach (front tire to the chain hook) are given for the highest position of the material handling arm and for the lowest position of the material handling arm.
Illustration 1 g00104502
Position A represents the retracted position. Position B represents the mid-position. Position C represents the extended position.The following table provides the rated operating loads for the standard machine configuration with material handling arm.
Table 1
RATED LOAD FOR MATERIAL HANDLING ARM    
Position of Material Handling Arm    Retracted
A    Mid-Position
B    Extended
C    
Rated Operating Load    
2095 kg (4619 lb)    
1660 kg (3660 lb)    
1377 kg (3036 lb)    
Placement Height at Lowest Position    
-1502 mm (-4 ft 11 inches)    
-2306 mm (-7 ft 7 inches)    
-3111 mm (-10 ft 2 inches)    
Reach at Lowest Position    
1529 mm (5 ft)    
2122 mm (7 ft)    
2715 mm (8 ft 11 inches)    
Placement Height at Highest Position    
5574 mm (18 ft 2 inches)    
6379 mm (20 ft 11 inches)    
7185 mm (23 ft 7 inches)    
Reach at Highest Position    
1608 mm (5 ft 3 inches)    
2199 mm (7 ft 2 inches)    
2791 mm (9 ft 2 inches)