RADIATOR AS 9Y0793 - Caterpillar

START BY:a) remove radiator and radiator guard (power shift)b) remove radiator and radiator guard (direct drive and special application) 1. Remove the tension from the vee belts (1) and remove them from the pulleys.2. Loosen bolt (2) and turn it out about1/8"(3.2 mm). 3. Install tooling (A) on vibration damper and pulley (3), then loosen it.4. Remove tooling (A). Remove bolt and washer (2). Remove vibration damper and pulley (3).Install Vibration Damper And Pulley
1. Put the vibration damper and pulley (1) in position on the crankshaft. 2. Install bolt and washer (2). Tighten bolt to a torque of 230 20 lb.ft. (312 27 N m), then hit the bolt with a hammer and tighten again to 230 20 lb.ft. (312 27 N m).Install the vee belts. Make an adjustment to the belts.END BY:a) install radiator and radiator guard (power shift)b) install radiator and radiator guard (direct drive and special application)