1968469 RADIO GP Caterpillar parts
307B
Rating:
Alternative (cross code) number:
CA1968469
196-8469
1968469
CA1968469
196-8469
1968469
MINI HYD EXCAVATOR,
Compatible equipment models: 1968469:
For full view, you need register
Information:
Test Preparation
Note: The conveyors will operate during the test procedure. Make sure to evacuate the contents of the conveyor before the machine is moved into the test area.
Drive the machine to a smooth, horizontal surface.
Illustration 2 g06228671
Move propel lever (1) into the maximum position opposite of the direction of travel. The farther the lever is moved, the faster the machine will stop. Release the lever.
Verify that the parking brake is engaged by checking parking brake indicator (2). The parking brake should activate automatically when the machine is stopped. If the parking brake is not active, use propel lever (1) to stop the machine completely.
Illustration 3 g06228685
Ensure that the conveyor system is deactivated. The indicator light next to the button should be off. If the conveyor system is operating, push conveyor drive on/off button (5) to deactivate.
Ensure that the water spray system is deactivated. The indicator light next to the button should be off. If the water spray system is operating, push water spray button (3) to deactivate.
Ensure that the vacuum dust control system, if equipped, is deactivated. The indicator light next to the button should be off. If the vacuum dust control system is operating, push vacuum dust control button (4) to deactivate.
Illustration 4 g06228728
Ensure that the rotor system is deactivated. Indicator light next to the button should be off. If the rotor system is operating, push rotor button (6) to deactivate.
Illustration 5 g06233143
Use conveyor swing buttons (7) to center the conveyor.
Use conveyor lower button (8) to lower the conveyor.
Use propel lever (1) to center the front tracks.
Illustration 6 g06237159
Observe level indicator (9). If the indicator shows "0" go to Step 13. If the indicator does not show "0", go to Step 12.
Illustration 7 g06237161
Use rear leg height switches (10) and (11) to level the rear of the machine. Level indicator (9) will show "0" when the rear of the machine is level. Make sure that the rotor does not contact the ground during this step.
Illustration 8 g06229744
Ensure that the engine is operating in low idle. The high idle indicator light should be off. If this indicator is illuminated, throttle control button (12) to operate the engine in low idle.
Illustration 9 g06237162
Move engine start switch (13) to the OFF position.
Illustration 10 g06237164
Disconnect case drain hose assembly (14) from case drain fitting (15) on the second stage conveyor motor. Connect the case drain hose assembly to the inlet side of the flowmeter.
Connect the hose on the outlet side of the flowmeter to the case drain port.Test Procedure
Move engine start switch (13) to the START position. Release the switch when the engine starts.
Use throttle control button (12) to operate the engine in high idle.
Illustration 11 g06237167
Monitor hydraulic oil temperature (16) on the operator display. Operate the machine until the oil temperature reaches the test temperature listed in the "Specifications" section.
Illustration 12 g06237168
Use conveyor speed increase button (17) to operate the conveyor at maximum speed.Note: The conveyors will operate during the next step.
Press conveyor drive on/off button (5). Read the flow on Tool (B).
Press conveyor drive on/off button (5) to stop the
Note: The conveyors will operate during the test procedure. Make sure to evacuate the contents of the conveyor before the machine is moved into the test area.
Drive the machine to a smooth, horizontal surface.
Illustration 2 g06228671
Move propel lever (1) into the maximum position opposite of the direction of travel. The farther the lever is moved, the faster the machine will stop. Release the lever.
Verify that the parking brake is engaged by checking parking brake indicator (2). The parking brake should activate automatically when the machine is stopped. If the parking brake is not active, use propel lever (1) to stop the machine completely.
Illustration 3 g06228685
Ensure that the conveyor system is deactivated. The indicator light next to the button should be off. If the conveyor system is operating, push conveyor drive on/off button (5) to deactivate.
Ensure that the water spray system is deactivated. The indicator light next to the button should be off. If the water spray system is operating, push water spray button (3) to deactivate.
Ensure that the vacuum dust control system, if equipped, is deactivated. The indicator light next to the button should be off. If the vacuum dust control system is operating, push vacuum dust control button (4) to deactivate.
Illustration 4 g06228728
Ensure that the rotor system is deactivated. Indicator light next to the button should be off. If the rotor system is operating, push rotor button (6) to deactivate.
Illustration 5 g06233143
Use conveyor swing buttons (7) to center the conveyor.
Use conveyor lower button (8) to lower the conveyor.
Use propel lever (1) to center the front tracks.
Illustration 6 g06237159
Observe level indicator (9). If the indicator shows "0" go to Step 13. If the indicator does not show "0", go to Step 12.
Illustration 7 g06237161
Use rear leg height switches (10) and (11) to level the rear of the machine. Level indicator (9) will show "0" when the rear of the machine is level. Make sure that the rotor does not contact the ground during this step.
Illustration 8 g06229744
Ensure that the engine is operating in low idle. The high idle indicator light should be off. If this indicator is illuminated, throttle control button (12) to operate the engine in low idle.
Illustration 9 g06237162
Move engine start switch (13) to the OFF position.
Illustration 10 g06237164
Disconnect case drain hose assembly (14) from case drain fitting (15) on the second stage conveyor motor. Connect the case drain hose assembly to the inlet side of the flowmeter.
Connect the hose on the outlet side of the flowmeter to the case drain port.Test Procedure
Move engine start switch (13) to the START position. Release the switch when the engine starts.
Use throttle control button (12) to operate the engine in high idle.
Illustration 11 g06237167
Monitor hydraulic oil temperature (16) on the operator display. Operate the machine until the oil temperature reaches the test temperature listed in the "Specifications" section.
Illustration 12 g06237168
Use conveyor speed increase button (17) to operate the conveyor at maximum speed.Note: The conveyors will operate during the next step.
Press conveyor drive on/off button (5). Read the flow on Tool (B).
Press conveyor drive on/off button (5) to stop the
Caterpillar parts catalog:
Parts radio Caterpillar catalog:
2510173
RADIO-AM/FM
313B
313B
1966807
RADIO GP-CD
307B, 312B L, 312C, 315B L, 317B LN, 318B
307B, 312B L, 312C, 315B L, 317B LN, 318B
1740001
RADIO AS
312B L, 312C, 315B L, 315C, 317B LN, 318B
312B L, 312C, 315B L, 315C, 317B LN, 318B
2036232
RADIO GP
307, 307B, 312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 319C
307, 307B, 312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 319C
1655934
RADIO GP
M312, M315, M318, M320
M312, M315, M318, M320
1146564
RADIO-AM/FM
307, 312, 312B L, 315, 315B L, 317, 317B LN, 318B
307, 312, 312B L, 315, 315B L, 317, 317B LN, 318B
3068802
RADIO-AM/FM
307D, 308D, 311D LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 3...
307D, 308D, 311D LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 3...
3335703
RADIO GP
305.5, 305.5E, 306, 306E, 307E, 308E
305.5, 305.5E, 306, 306E, 307E, 308E
2715867
RADIO GP
305.5, 306
305.5, 306
1636707
RADIO GP
320C, 365C, 385C, M318C, M322C
320C, 365C, 385C, M318C, M322C
1636708
RADIO GP
307C, 311C, 312C L, 315C, 318C, 320C, 320C L, 322C, 325C, 330C, 330C L, 330C MH, 345B II, 345B II MH, 345C, 345C MH, 365C, 385B, 385C, 385C FS, 385C L, 5090B, M313C, M315C, M316C, M318C, M318C MH, M32...
307C, 311C, 312C L, 315C, 318C, 320C, 320C L, 322C, 325C, 330C, 330C L, 330C MH, 345B II, 345B II MH, 345C, 345C MH, 365C, 385B, 385C, 385C FS, 385C L, 5090B, M313C, M315C, M316C, M318C, M318C MH, M32...
1532445
RADIO-AM/FM
307B, 308C, 311B, 314C, 318B, 320B, 321B, 321C, 325C
307B, 308C, 311B, 314C, 318B, 320B, 321B, 321C, 325C