RAIL AS-GRAB 1246151 - Caterpillar

When Required
Engine Air Intake System - Service filters Ether Starting Aid (If Equipped) - Replace cylinder Fuel System - Service when loss of power Fuses and Circuit Breaker - Replace/reset Windshield Wipers and Washer - Inspect/replace Bucket Tips and Side Cutters - Replace if damaged Electric Fuel Refueling Pump (If Equipped) - Clean strainer Oil Filter Inspection - Inspect for debris Bucket Clearance (If Equipped with a Bucket Capable of Shim Adjustment) - Inspect/adjust Boom Base - Lubricate the fitting Cab Air Filter - Clean Tracks - Check/adjust Counterweight Removal Chain - Check/cleanEvery 10 Service Hours or Daily
Engine Crankcase Oil - Check oil level Hydraulic Tank Oil - Check oil level Radiator - Check coolant level, clean core Fuel Tank - Drain water and sediment Walk-Around Inspection - Inspect machine Seat Belt - Inspect Undercarriage - Check for oil leaks, wear and loose bolts Indicators and Gauges - Test Travel Alarm - Test Backhoe Linkage - Lubricate the fittingsEvery 50 Service Hours or Weekly *
Backhoe Linkage - Lubricate the fittingsInitial 250 Service Hours *
Hydraulic System - Service screen and filters Swing Drive - Change oil Final Drives - Change oil Engine Valve Lash - Adjust on new or reconditioned engines at first oil change onlyEvery 250 Service Hours or Monthly *
Scheduled Oil Sampling (S O S) - Obtain, engine oil Engine Oil and Filter - Change oil and filter. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Hydraulic System - Obtain hydraulic oil sample on machines equipped with hammers and perform S O S and Infrared Analysis Cooling System Hoses - Inspect/check Cooling System - Add coolant additive, replace element (if equipped) Fan and Alternator Belts - Inspect Water Separator (If Equipped) - Check level Final Drives - Check oil level Swing Drive - Check oil level Swing Bearing - Lubricate the fittings Air Conditioner (If Equipped) - Test operation, adjust belt inspect/clean condenser and filterEvery 500 Service Hours or 3 Months *
Scheduled Oil Sampling (S O S) - Obtain, hydraulic system, final drive and swing drive Hydraulic System - Service screen and filters Fuel System - Wash primary element, change secondary filter Fuel Tank Cap and Fill Screen - Clean screen Engine Crankcase Breather - CleanEvery 1000 Service Hours or 6 Months *
Swing Drive - Change oil Batteries - CheckEvery 2000 Service Hours or 1 Year *
Final Drives - Change oil Hydraulic System - Change oil and screen Engine Valve Lash - Adjust Swing Gear - Add greaseEvery 3000 Service Hours or 2 Years *
Cooling System Coolant - Change coolant*First Perform Previous Service Hours Items