RAIL GP- 5173815 - Caterpillar

2. Disconnect hose assembly (1). Cap or plug immediately.3. Disconnect fuel injection lines (2). Cap or plug immediately.4. Disconnect tube assembly (3). Cap or plug immediately.5. Remove nut (4) and washer.6. Disconnect two wire assemblies (5).7. Remove two screws (6), nuts and washers.8. Remove bolt (7) and washer.9. Disconnect hose assembly (8). Cap or plug immediately.10. Attach strap and a suitable lifting device to the governor and fuel injection pump.11. Remove two bolts (9) and washers.12. Remove two bolts (11).13. Remove two nuts (10).14. Remove governor and fuel injection pump (12). The weight of the governor and fuel injection pump is 56 kg (125 lb). For installation of the governor and fuel injection pump, reverse the removal steps.End By:a. install pump assembly-hydraulicb. install fuel priming pump and fuel filter