RAM AR. 0521571 - Caterpillar

Circuit Breaker Reset - Depress the button in order to reset the circuit breakers. If the circuit is functioning properly, the button will remain depressed. If the button will not remain depressed, check the appropriate electrical circuit.
Illustration 1 g03032996
Circuit breaker compartment.
Three circuit breakers are located in a recessed compartment on the left-hand side of the machine. Turn the latch handle and open the door behind the operator cab access ladder in order to access the circuit breakers.
Illustration 2 g03032958
(1) Main circuit breaker
(2) Engine start circuit breaker
(3) Cab power (unswitched) circuit breaker
Main Circuit (1) - 80 amp
Engine Start (2) - 50 amp
Cab Power (Unswitched Circuits) (3) - 50 amp
Illustration 3 g03034525
Circuit breaker located near fuse block in operator cab.
(4) HVAC blower One circuit breaker is located near the fuse block in the right-hand rear corner of the operator cab. Remove the cover over the fuse block to inspect the circuit breaker.
HVAC Blower (4) - 15 amp