REAR STRUCTURE 5P9323 - Caterpillar

Illustration 4 g00921564
Connect hose (20) to the hydrostatic drive pump.
Illustration 5 g00921562
Connect electrical connectors (19) to the hydrostatic drive pump.
Illustration 6 g00921538
Connect hose (18) to the hydrostatic drive pump.
Illustration 7 g00921537
Connect hoses (17) to the hydrostatic drive pump.
Illustration 8 g00921536
Connect hose (15) and hoses (16) to the hydrostatic drive pump. Install a new cable strap in order to secure hoses (16) together. Refer to the note that was made during the removal procedure for the location of the cable strap.
Illustration 9 g00921535
Install hose (14) between the engine and pressure control valve (8) .
Attach a suitable nylon lifting sling and a suitable hoist to battery tray (6). The weight of the battery tray is approximately 24 kg (53 lb).
Illustration 10 g00921534
Use the attached lifting equipment to carefully position battery tray (6) to the machine. Secure the battery tray in position with bolts (12), the nuts, the washers, bolts (13) and the washers.
Remove the nylon lifting sling and the hoist from battery tray (6) .
Illustration 11 g00921533
Install bolts (11), the nuts and the washers that secure battery tray (6) to post (10) .
Illustration 12 g00921532
Position pressure control valve (8) to battery tray (6). Secure the pressure control valve in position with bolts (9), the nuts and the washers.
Illustration 13 g00921531
Position electrical component (7) to battery tray (6) before securing the electrical components in place with new cable straps. For the location and the number of the cable straps, refer to the note that was made during the removal procedure.
Illustration 14 g00921530
Position fuses (5) to battery tray (6) before securing the fuses in place with new cable straps. For the location and the number of the cable straps, refer to the note that was made during the removal procedure.
Illustration 15 g00921529
Connect lines (4) for the window washers at the connections to valves (3). Install new cable straps in order to secure the lines to the underside of the machine. For the location and the number of the cable straps, refer to the note that was made during the removal procedure.
Illustration 16 g00921528
Connect electrical wires (2) to window washer reservoir (1) .,,,, End By:
Install the upper hydraulic tank. Refer to Disassembly and Assembly ManualRENR5162, "Hydraulic Tank - Install".
Install the battery. Refer to Disassembly and Assembly ManualRENR5153, "Battery - Remove and Install".
Install the bottom guard. Refer to Disassembly and Assembly ManualRENR5162, "Sump Guard - Remove and Install".
Install the hood, the door and the grill to the engine enclosure. Refer to Disassembly and Assembly ManualRENR5153, "Engine Enclosure - Remove and Install".
Remove the boom cylinder lock and lower the boom. Refer to Operation and Maintenance Manual, "Boom Cylinder Lock - Removal and Installation Procedures".