RECEIVER AS 2500381 - Caterpillar

Illustration 1 g02645236
Table 1
Specification for 234-4601 Stick Cylinder Gp    
Item     Qty     Part     Specification Description    
1     1     241-7342 Bushing     During the press fit, insert the bushing (1) in the cap assembly with the tapered side first.
Inside diameter before assembly is
90.16 0.02 mm (3.550 0.001 inch).
Installation depth is
9.85 0.30 mm (0.388 0.012 inch).    
2     1     7Y-4956 Locknut     Use any one of the following methods to tighten the locknut:
Before assembly, lubricate the threads of the locknut (2) with 309-6932 Hydraulic Oil all around and then torque to
15500 800 N m (11432 590 lb ft).
Or
Lubricate the threads of the locknut (2) with molybdenum disulfide and then torque to
11500 600 N m (8482 443 lb ft).    
3     2     191-5604 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
4     1     9X-3607 Seal As     Lubricate the inside diameter and the outside diameter with clean grease.    
5     1     191-5605 Ring     Lubricate the inside diameter and the outside diameter with clean grease.    
A     1     242-6806 Cylinder As     Bore is
170.00 0.10 mm (6.693 0.004 inch).    
B     1     242-6811 Rod As     Diameter is
114.93 0.03 mm (4.525 0.001 inch).    
C     1     191-5602 Head     Bore is
115.63 0.03 mm (4.552 0.001 inch).    
6     During the press fit, insert the bushing (6) in the rod assembly with the tapered side first.
The bushing is one of the following part numbers:    
1 290-9183 Bushing     Inside diameter before assembly is
90.25 0.04 mm (3.553 0.002 inch).
Installation depth is
10.0 0.5 mm (0.39 0.02 inch).    
1 343-9342 Bushing     Inside diameter before assembly is
90.16 0.02 mm (3.550 0.001 inch).
Installation depth is
10.0 0.5 mm (0.39 0.02 inch).    
7     1     107-6933 Stop     Free linear movement of the stop after assembly is
0.50 0.26 mm (0.020 0.010 inch).    
8     2     095-0930 Retaining Ring     Maximum outside diameter of the retaining rings after assembly is
81.0 mm (3.19 inch).    
9     1     231-6843 Seal Ring     The slit of the seal ring must turn in the direction of the piston.    
10     1     191-5644 Bushing     Outside diameter is
120.148 0.032 mm (4.7302 0.0013 inch).
Thickness is
1.2 0.3 mm (0.05 0.01 inch).    
11     1     191-5645 Buffer Seal     Lubricate