RECEIVER AS 5199285 - Caterpillar

5199285 RECEIVER AS Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5199285
519-9285
5199285

Weight: 2 pounds 0 kg.

Buy RECEIVER AS 5199285 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 16

Caterpillar 5199285 Parts scheme RECEIVER AS

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

301.6 Mini Hydraulic Excavator MY600001-UP (MACHINE) POWERED BY C1.1 Engine

519-8415: LINES GP-AIR CONDITIONER » M00930070325

301.8 Mini Hydraulic Excavator H8X00001-UP (MACHINE) POWERED BY C1.1 Engine

519-8415: LINES GP-AIR CONDITIONER » M00930460352

302 CR Mini Hydraulic Excavator RHM00001-UP (MACHINE) POWERED BY C1.1 Engine

519-8415: LINES GP-AIR CONDITIONER » M00930520401

Information:

Illustration 1 g00930987
Harness wire identification
Note: The voltage from the PCP to the control station processor (CSP) is approximately equal to the battery voltage minus 2 VDC. The normal operating voltage is 7.5 VDC to 32 VDC.
Table 1
Switch Input Parameters Voltage with Reference to Switch Common (Pin 12)
Input signal voltage The maximum is 5.0 VDC
Switch ON Less than 2.5 VDC
Switch OFF Greater than 3.74 VDC Expected Result:All voltages are correct.Results:
OK - All voltages are correct. Go to Test Step 2
NOT OK - All voltages ARE NOT correct.Repair: Repair the harness or replace the harness.STOPTest Step 2. VERIFY THE OPERATION OF THE BUTTON PANEL AT THE MARINE POWER DISPLAY (MPD).
Ensure that the screen for "CONTROL SYSTEM INFORMATION" is displayed on the MPD.
Monitor the "Station Button Status" while pressing and holding the suspect button. Expected Result:The indicator for "Station Button Status" indicates OFF when the button is not pressed. The indicator indicates "ON" when the