RECEPTACLE AS-POWER 3176379 - Caterpillar

3003 Engine
The inlet manifold and the valve mechanism cover on the 3003 engine are the same part. Refer to the Specifications Module, "Valve Mechanism Cover" topic for additional information. 3013, 3014, and 3024 Engines
Illustration 1 g00456676
Inlet manifold and components for installation (1) Mounting bolts The 3013 engine has two long bolts and four shorter bolts. Tighten the mounting bolts to the following torque. ... 10 N m (90 lb in) The 3014 and 3024 engines have two long bolts and six shorter bolts. Tighten the mounting bolts to the following torque. ... 14 N m (10 lb ft)Note: Two different lengths of bolts are used. Be sure that the correct length of bolt is installed in the holes. (2) Washer (3) Inlet manifold (4) Roll pin (5) Gasket (6) Spacer plate (7) Gasket (8) Cylinder head