RECOVERY GP-COOLANT 1283500 - Caterpillar

Seat Belt Adjustment for Non-Retractable Seat Belts
Adjust both ends of the seat belt. The seat belt should be snug but comfortable.Lengthening the Seat Belt
Illustration 1 g00100709
Unfasten the seat belt.
Illustration 2 g00932817
To remove the slack in outer loop (1), rotate buckle (2). This will free the lock bar. This permits the seat belt to move through the buckle.
Remove the slack from the outer belt loop by pulling on the buckle.
Loosen the other half of the seat belt in the same manner. If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt.Shortening the Seat Belt
Illustration 3 g00100713
Fasten the seat belt. Pull out on the outer belt loop in order to tighten the seat belt.
Adjust the other half of the seat belt in the same manner.
If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt.Fastening The Seat Belt
Illustration 4 g00932818
Fasten the seat belt catch (3) into the buckle (2). Make sure that the seat belt is placed low across the lap of the operator.Releasing The Seat Belt
Illustration 5 g00100717
Pull up on the release lever. This will release the seat belt.Extension of the Seat Belt
When using retractable seat belts, do not use seat belt extensions, or personal injury or death can result.The retractor system may or may not lock up depending on the length of the extension and the size of the person. If the retractor does not lock up, the seat belt will not retain the person.
Longer, non-retractable seat belts and extensions for the non-retractable seat belts are available.Caterpillar requires only non-retractable seat belts to be used with a seat belt extension.Consult your Caterpillar dealer for longer seat belts and for information on extending the seat belts.