RECTIFIER GP-REVOLVING 3865154 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     1    Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Remove the engine mount's (front). Refer to Disassembly and Assembly, "Engine Mounts (front) - Remove and Install".
Illustration 1 g00946093
Install Tooling (A), a nylon strap and a suitable lifting device to the engine.
Raise the engine approximately 25 mm (1 inch) above the engine mounts. Note: Do not allow the engine fan to damage the fan guard or the radiator.
Illustration 2 g00976431
Remove bolts (1) and remove front engine support (2) from the front of the engine.
The engine support bracket on the left side of the engine can be accessed under the machine.