RECTIFIER 5027411 - Caterpillar

Standard Seat
Illustration 1 g06285915
(1) Recline Lever
(2) Seat Fore and Aft Lever
Illustration 2 g06276785
(1) Recline Lever
(2) Seat Fore and Aft LeverUse lever (1) to change the angle of the backrest.Lift up on fore and aft lever (2) to release the seat from the locked position. Adjust the seat forward or rearward to the desired position and then release the lever to lock the seat.Comfort Level Seat (If Equipped)
Illustration 3 g06276793
(1) Recline Lever
(2) Weight Adjustment Lever (or knob)
(3) Seat Fore and Aft LeverUse lever (1) to change the angle of the backrest.To adjust for your weight, turn lever or knob (2) on the front of the seat.Lift on fore and aft lever (3) to release the seat from the locked position. Adjust the seat forward or rearward to the desired position and then release the lever to lock the seat.Deluxe Level Seat (If Equipped)
Illustration 4 g06276729
(1) Headrest
(2) Heat Switch
(3) Lumbar Adjustment Knob
(4) Recline Lever
(5) Suspension Adjustment
(6) Seat Fore and Aft LeverThe operator can adjust the height of headrest (1). To adjust the headrest, hold the headrest with both hands. Move the headrest up and down. Release the headrest when the desired position is attained. The headrest will remain in the desired position.
Illustration 5 g06251600
(A) Low heat
(B) High heatSeat heater switch (2) is a three position switch. The middle position of the switch is off. Press the top position of the switch for low heat. Press the bottom of the switch for high heat.
Heat-induced burns can occur when some people use a seat heater. Do not use the seat heater if you have a reduced ability to sense temperature changes, a reduced ability to feel pain, or have sensitive skin.
The lumbar support is located in the back of the seat. Turn knob (3) counterclockwise to increase the force of the lumbar support. To decrease the lumbar support, continue to turn the knob counterclockwise.Pull up lever (4) to change the angle of the backrest. With the backrest in the desired position. Release the lever.Use seat height suspension adjustment lever (5) to adjust the seat for the operator's height and weight.Lift on fore and aft lever (6) to release the seat from the locked position. Adjust the seat forward or rearward to the desired position and then release the lever to lock the seat.Premium Level Seat (If Equipped)
Illustration 6 g06276769
(1) Headrest
(2) Cooling Switch
(3) Upper Lumbar Adjustment Switch
(4) Lower Lumbar Adjustment Switch
(5) Recline Lever
(6) Heat/Cool Switch
(7) Suspension Adjustment
(8) Seat Fore and Aft Lever
(9) Seat cushion angle adjuster
(10) Seat cushion fore and aft adjusterThe operator can adjust the height of headrest (1). To adjust the headrest, hold the headrest with both hands. Move the headrest up and down. Release the headrest when the desired position is attained. The headrest will remain in the desired position.
Illustration 7 g06251623
(C) Cooling on
(D) Cooling offTo cool the seat, press the top of cooling switch (2). Press the bottom of the switch to turn the cooling off.The lumbar controls (3) and (4) on the back of the seat back all use two position switches. Press the +