RECTIFIER 5171147 - Caterpillar

2. Remove water spray hose from the rear of the torque hub. B. Tilt Control Assembly Removal
1. Disconnect the tilt and lift cylinders from the cutter box. 2. Remove connections for lift and tilt gauges. C. Tilt Pin Removal
1. Remove the 4 bolts holding the pin to the cutter yoke assembly. 2. Using a drift strike the center of the inside of pin assembly driving the pin out of the cutter yoke. 3. Repeat the procedure on the other side of the yoke.D. Bearing Removal
1. Using a brass drift against the outer race drive the bearing out of the cutter box mounting lugs.