2T2624 REDUCER GP-ELEVATOR SPEED Caterpillar parts
613C, 613C II
Rating:
Alternative (cross code) number:
CA2T2624
2T-2624
2T2624
CA2T2624
2T-2624
2T2624
Weight: 490 pounds 222 kg.
WHEEL SCRAPER, WHEEL TRACTOR,
Number on catalog scheme:
9
For full view, you need register
Information:
Specifications
Illustration 1 g03394352
Table 1
Specification for 389-2123 Pump Drive Gp
Item Qty Part Specification Description
1 399-0313 Shaft Lubricate shaft surface with 50/50 mixture of break-in lubricant and transmission oil.
2 177-0524 Bushing Chill bushing to
−32 °C (−25 °F). Press bushing flush with surface as shown.
3 8B-8439 Bearing Lubricate bearing with 50/50 mixture of break-in lubricant and transmission oil. Press bearing on the shaft prior to assembly. Assembly Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5P-5197 Snap Ring Pliers 1
B 136-1452 Snap Ring Pliers 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 2 g03388536
Press bearing (9) onto shaft (10). Install retaining ring (8) .Note: Lubricate bearing and shaft surface with 50/50 mixture of break-in lubricant and transmission oil.
Illustration 3 g03388523
Use a suitable press in order to install bushing (7) into pump drive housing (1) .Note: When a new bushing is installed, the bushing must be chilled too approximately −32 °C (−25 °F).Note: Press bushing (7) flush with recessed surface of pump drive housing (1) .
Illustration 4 g03388518
Install shaft (5) into pump drive housing (1). Install snap ring (6) with Tool (B) .Note: Ensure the outer race of bearing (9) does not rotate in the pump drive housing (1) .
Illustration 5 g03388162
Install drive gear (3). Install snap ring (4) with Tool (A).
Illustration 6 g03388159
Install lube line fitting (2) into pump drive housing (1) .Note: Lube fitting is fitted with an O-ring.Note: Use a suitable lifting device to move the pump drive. The pump drive weighs approximately 39 kg (85 lb).End By: Install the pump drive.
Illustration 1 g03394352
Table 1
Specification for 389-2123 Pump Drive Gp
Item Qty Part Specification Description
1 399-0313 Shaft Lubricate shaft surface with 50/50 mixture of break-in lubricant and transmission oil.
2 177-0524 Bushing Chill bushing to
−32 °C (−25 °F). Press bushing flush with surface as shown.
3 8B-8439 Bearing Lubricate bearing with 50/50 mixture of break-in lubricant and transmission oil. Press bearing on the shaft prior to assembly. Assembly Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5P-5197 Snap Ring Pliers 1
B 136-1452 Snap Ring Pliers 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 2 g03388536
Press bearing (9) onto shaft (10). Install retaining ring (8) .Note: Lubricate bearing and shaft surface with 50/50 mixture of break-in lubricant and transmission oil.
Illustration 3 g03388523
Use a suitable press in order to install bushing (7) into pump drive housing (1) .Note: When a new bushing is installed, the bushing must be chilled too approximately −32 °C (−25 °F).Note: Press bushing (7) flush with recessed surface of pump drive housing (1) .
Illustration 4 g03388518
Install shaft (5) into pump drive housing (1). Install snap ring (6) with Tool (B) .Note: Ensure the outer race of bearing (9) does not rotate in the pump drive housing (1) .
Illustration 5 g03388162
Install drive gear (3). Install snap ring (4) with Tool (A).
Illustration 6 g03388159
Install lube line fitting (2) into pump drive housing (1) .Note: Lube fitting is fitted with an O-ring.Note: Use a suitable lifting device to move the pump drive. The pump drive weighs approximately 39 kg (85 lb).End By: Install the pump drive.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts reducer Caterpillar catalog:
8I2388
REDUCER GP-ELEVATOR SPEED
613C, 613C II, 613G
613C, 613C II, 613G
1488413
REDUCER AS
1090, 1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 307C, 308C, 311C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 318C, 319D, 320B, 320C, 320C L, 320D, 320D L, 320D LRR, 320D RR, 3...
1090, 1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 307C, 308C, 311C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 318C, 319D, 320B, 320C, 320C L, 320D, 320D L, 320D LRR, 320D RR, 3...
1536236
REDUCER AS
1090, 1190, 1190T, 1290T, 16M, 2290, 2390, 2391, 2491, 2590, 2864C, 311C, 312C, 312C L, 312D, 312D L, 312D2, 313D, 314C, 315B L, 315C, 315D L, 317B LN, 319D, 319D L, 319D LN, 320C, 320C FM, 320D FM, 3...
1090, 1190, 1190T, 1290T, 16M, 2290, 2390, 2391, 2491, 2590, 2864C, 311C, 312C, 312C L, 312D, 312D L, 312D2, 313D, 314C, 315B L, 315C, 315D L, 317B LN, 319D, 319D L, 319D LN, 320C, 320C FM, 320D FM, 3...
1090, 1190, 1190T, 1290T, 143H, 163H NA, 16M, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 2864C, 30/30, 311C, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 313B, 313D, 314C, 315, 315B L, 315C, 315...
0308144
REDUCER-FLARED
12G, 130G, 140G, 215, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 3126B, 315B FM L, 3406B, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3512C, 3516C, 36...
12G, 130G, 140G, 215, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 3126B, 315B FM L, 3406B, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3512C, 3516C, 36...
1G2883
REDUCER GP
PS-300
PS-300
1838015
REDUCER GP-SPEED
W330B
W330B
8I2388
REDUCER GP-ELEVATOR SPEED
613C, 613C II, 613G
613C, 613C II, 613G