REDUCER 7X8295 - Caterpillar

Illustration 6 g01910093
"Select Delay" window
To scroll through the list of specific delays, use the arrow button on the monitor display group or use the touchscreen. The default duration of the delay in minutes is displayed at the lower left corner of the "Select Delay" window.
Illustration 7 g02835996
View of the delay that is displayed in the status bar
(3) Delay category
(4) Configured time that is remaining for the delay
Highlight the type of delay that is desired. Press "OK" on the touchscreen or on the monitor display group. The main screen appears with the selected delay and the default time that is remaining in the status bar. Also, the "State Icon" window that represents the current operating state of the truck will be grayed-out when a truck is on delay.Ending the Delay
If the delay ends before the configured delay time, the delay can be ended manually. Perform the following procedure to end the delay:
On the monitor display group, press the button for the delay on the toolbar. The "Select Delay" window appears with the "End Delay" button highlighted.
Illustration 8 g01910076
"Select Delay" window
Press "End Delay" on the touchscreen for the monitor display group. This action will end the delay. Information of the delay will be sent to the office.Changing the Delay Value
If the delay is different from the default duration, and before applying the delay, perform the following procedure to change the duration:Note: The "Select Delay" window may also be configured not to display the time adjustment arrow buttons. This feature ensures that the default delay time is always used. Add the "$ No Delay Time Reduce" and the "$ No Delay Time Extend" configuration keys in the "TopeConfig.txt" file to remove the time reduce arrow button and the time extend arrow button in the select delay window.
Illustration 9 g01910073
Changing the default delay value
(5) Arrow for shortening the delay
(6) Arrow for extending the delay
In the "Select Delay" window with the highlighting of the type of delay that is desired, press the appropriate arrow buttons. Refer to Illustration 9.
Press "OK". Continue pressing the arrow buttons until the desired time is reached. Shortening the delay will shorten the delay time by 2 minute increments. Extending the delay will extend the delay time by 2 minute increments.
To accept the delay time, press "OK". The counter for the delay will begin. Displaying the Current Delay
Illustration 10 g01910060
Displaying the current delay
(5) Current delay If a delay is in progress when the "Select Delay" window is displayed, the current information for the delay will be displayed. Refer to Illustration 10. When scrolling through the delay categories, the default delay times for the delay category that is highlighted will be displayed. Perform the following procedure to return the display to information on the current delay:
Press the "Current" button on the touchscreen for the monitor display group.
Press "OK". The information on the current delay will be displayed in the "Select Delay" window.Sending a Mayday Message
"Send Mayday" - This icon is a button on the toolbar of the monitor display group that is used to send