REFRIGERANT COMPRESSOR ARRANGEMENT 2P7314 - Caterpillar

Action Indicator (9) - There is a malfunction in a machine system. This indicator is used in conjunction with the system indicators to convey the severity of the situation.
Charging System (11) - When this indicator is illuminated, there is a fault in the charging system.
Fuel System Water Separator (12) - When the water separator is full, this indicator is displayed. Drain the water from the water separator as soon as possible. Refer to Operation and Maintenance Manual, "Fuel System Water Separator - Drain".
Machine Security System (MSS) (13) - If the machine is equipped with MSS, this indicator will illuminate when MSS is activated.
Engine Fault (14) - When this indicator is illuminated, there is a general fault in the engine.
High Beam (15) - When this indicator is illuminated, the high beam headlights are on.
Differential Oil Pressure (16) - This alert indicator shows that there is low differential oil pressure.
Electric Engine Preheat (17) - This indicator will appear when the engine start switch is in the ON position. The engine can be started after the indicator disappears. When the engine coolant temperature is too low, the electric engine preheat will be activated.
Intake Air Filter (18) - This warning is displayed when the air filter is restricted. If the air filter is restricted, then engine output will be decreased. Immediately inspect the air filter. Clean the air filter. Inspect the condition of the air filter. Replace the air filter, if necessary. Perform any necessary repairs. Refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".
Right Turn Signal (19) - This indicator illuminates when the right turn signal light is operating. Gauge Indicators
Tachometer (10) - The tachometer will indicate the engine RPM. This also indicates engine overspeed. Engine overspeed is represented by the yellow zone and the red zone.
Fuel Level (20) - When the level of fuel in the fuel tank is low, the fuel level gauge will be in the red zone.
Torque Converter Oil Temperature (21) - When the oil for the torque converter is above normal operating temperature, the torque converter oil temperature gauge will be in the red zone. Reference See Operation and Maintenance Manual, "Troubleshooting - Engine" for possible causes of overheating.
Engine Coolant Temperature (23) - This gauge displays the temperature of the engine coolant. If the temperature rises into the red zone, the warning alarm will sound. Stop the truck in a safe place and investigate the cause. Do not operate the truck if the alarm continues to sound, or if the pointer is completely in the red zone. Truck operation during the sounding of the warning alarm may damage the engine. Stop the truck in a safe place and investigate the cause.
Hydraulic Oil Temperature (24) - When the hydraulic oil temperature is above the normal operating value, the hydraulic oil temperature gauge will be in the red zone. LCD Digital Data Display
LCD Display (22) - The LCD Display window is used to show different sets of data which is important to the operator.