REGULATOR GP-FUEL PRESSURE 2051306 - Caterpillar

REM08-28
Reman
September 2008 PRODUCT LINE ADDITIONS: CAT-POWERED TEREX - O&K ENGINE SUPPORT PROGRAM Announcement
Caterpillar announces the availability of a C32 engine and two C18 engines to support TEREX - O&K GmBH shovel/excavators. In addition to these new engines, Caterpillar also announces the availability of a Remanufactured C32 engine and two C18 engines to support this program. The program is supported through the Caterpillar Parts Network with an Engine Arrangement Complete (EAC) or Reman part number. The EAC or Reman part number can be ordered through ANTARES.
The following Reman part numbers are on seed support. They might show "0" on-hand quantity, even though orders for Reman will be filled from new with new inventory on hand. When Reman is the preferred option, always order under the Reman part number regardless of what the system shows for on hand, as long as there is a new equivalent available, the Reman order will be filled.Coverage
These remanufactured engines will provide dealers and customers with an additional repair option. Refer to the following table for engine model and application identification. For further consist details consult the Engines Technical Supplements on the Reman website, TMI, and/or the Service Information System. Special Notes ? EAC stock is intended to fulfill catastrophic field failures, dealer inventory needs, and fulfillment of contractual agreements.
? If local needs require that you have an engine in inventory at time of machine delivery, we suggest that the dealer place an Engine Arrangement Complete order thru the parts department at the same time the Terex O & K machine order is placed. This process will ensure delivery at the approximate same time.
? EAC part numbers are ordered through the dealer?s Caterpillar? parts ordering system / ANTARES.
? EAC 316-0037 or 316-0039 will not include the fan drive, fan adapter, belt tensioner, air-lines, alternator, alternator mounting group, Freon compressor, starter and ether starter.
? EAC 316-0037 will be built with a water-cooled center section turbo charger. This will require the technician to add an extra vent line to the cooling system when installing the EAC. The extra vent line should be an 8mm hose and be installed with a continuous upward slope to prevent air locks. The pipe should run from a connection on the turbo water return line to the expansion tank. New production O & K machines will ultimately switch to this change but as of this writing have not done so.
? If the technician wishes to compare the consist of the EAC to the original engine (as shipped from Caterpillar and installed in the machine), he or she should access TMI and compare the consist as shipped (use engine S/N) with the Engine Arrangement Complete number (EAC).
? If the technician wishes to compare the performance iron of the installed engine (Engine Arrangement Core) with the Engine Arrangement Complete number (EAC), he or she needs to compare the installed Engine Ar-Core to the Engine Ar-Core found within the EAC.
? EAC stock is intended to fulfill both