AVSPARE.COM
parts catalog

REGULATOR GP-GAS PRESSURE 3904499 - Caterpillar



3904499 REGULATOR GP-GAS PRESSURE Caterpillar parts 3516B REGULATOR
Rating:
67
Alternative (cross code) number:
CA3904499
390-4499
3904499
Caterpillar 3904499 REGULATOR GP-GAS PRESSURE

Buy REGULATOR GP-GAS PRESSURE 3904499 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 3904499:

GENERATOR SET  3516B   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 1 g02565758
Before operating the engine, the oil pump must be lubricated with clean engine oil. The oil pump must turn freely by hand. Damage to the drive gear and internal pump damage can occur if the oil pump is not lubricated with clean engine oil.
Table 1
Specification for 361-5604 Engine Oil Pump Gp and 338-0996 Engine Oil Pump Gp
Item Qty Part Specification Description
- - - Pump performance:
- - - Oil type is SAE 30.
- - - Oil temperature is 50 °C (122 °F).
- - - Pump speed is 3000 rpm.
- - - Oil pressure is 359 kPa (52 psi).
- - O-ring seals Lubricate lightly with the lubricant that is being sealed.
2 2 224-3402 Gear Length is 67.500 0.025 mm (2.6575 0.0010 inch).
Depth of the bore in oil pump body for the gear is 67.63 mm (2.663 inch).
- - In order to install the oil pump gears on the shafts, the oil pump gears must first be heated. Do not heat the oil pump gears above the temperature of 316 °C (600 °F).
3 1 224-3404 Shaft Diameter is 18.000 0.005 mm (0.7087 0.0002 inch).
Diameter of the bore in oil pump body for the shaft is 18.050 0.010 mm (0.7106 0.0004 inch).
4 1 224-3403 Shaft Diameter is 18.000 0.005 mm (0.7087 0.0002 inch)
Diameter of the bore in oil pump body for the shaft is 18.050 0.010 mm (0.7106 0.0004 inch).
5 1 Oil pump drive gear In order to install the oil pump drive gear on the shaft, the oil pump drive gear must first be heated. Do not heat the oil pump drive gear above the temperature of 316 °C (600 °F).

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts regulator Caterpillar catalog:

9Y9171 REGULATOR GP-TEMPERATURE
3126, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, PM3508, PM3512, PM3516, PP3516, SPF343, SPF343C, SPT343, TH48-E80, TH55-E70
2485513 REGULATOR-TEMPERATURE
12H, 140M, 140M 2, 14M, 160M, 160M 2, 16G, 16H NA, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590, 3176, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 34...
2193240 REGULATOR-TEMPERATURE
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3516B, G3520B, G3520C, G3606, G3606B, G3608, PM3508, PM3512, PM3516, PMG3516, PP3516, SPF343, SPS343, SPT343, TH55-E70, XQC1200, XQC1600
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.