REGULATOR GP-GAS PRESSURE 4350888 - Caterpillar

Front Axle Housing for 535C and 545C (Oscillating)
Illustration 1 g01196445
(1) Torque for the ten bolts ... 300 40 N m (220 30 lb ft) (2) Torque for the two air purge screws ... 11 4 N m (97 35 lb in) (3) Torque for the oil level gauge ... 45 6 N m (33 4 lb ft) (4) At assembly, rubber toric seals and all surfaces that contact rubber toric seals must be clean and dry. Immediately before installation, apply a thin coat of oil to the contacting surface of the metal seal rings. The seal must be assembled square with the bore. Rubber toric seals must not have bulges or twists. (5) Torque for the four bolts (each side) ... 900 100 N m (665 75 lb ft) (6) Torque for the 24 bolts (each side) ... 300 40 N m (220 30 lb ft) (7) Torque for the drain assembly ... 130 10 N m (95 7 lb ft) (7a) Torque for the plug ... 65 6 N m (48 4 lb ft)Note: A 1 inch NPTF pipe thread is needed