REGULATOR-TEMPERATURE 5I8010 - Caterpillar

Configuration parameters are those parameters that affect engine power or various engine features. The configuration parameters are programmed at the factory. In most cases, the parameters do not need to be changed. The configuration parameters for the crank duration and the maximum number of cycles must be reprogrammed from the factory settings before the engine will start.The configuration parameters are programmed with the Caterpillar Electronic Technician. Refer to Troubleshooting for additional information in order to program the configuration parameters. The amount of fuel that is consumed by the engine is based on a map of the engine speed and the amount of rack. This parameter can be changed by the customer.If a parameter is unavailable, the electronic service tool will indicate "unavailable" when the parameter is selected. The rated fuel position is a parameter that is used to set engine power. A factory password is required to change this setting. The crank duration determines when the starting motors will be energized. The crank duration determines when the starting motors will be disengaged. Programming this parameter to 0 will prevent the Electronic Control Module (ECM) from engaging the starting motors. The crank cycle is a parameter that is the total number of crank cycles that can be performed. The ECM total fuel consumption can be programmed. A factory password is required to change this parameter.