REINFORCEMENT (RIGHT HAND) 6J6533 - Caterpillar

Table 2
J2 Connector (Power Train ECM)    
No.    Function    Type    
1     Key Switch (Start)     Switch Input    
2     Axle Cooler Solenoid     Solenoid Output    
4     Ride Control/Axle Cooler Return     Solenoid Return    
5     Ride Control Solenoid 1 (ON/OFF)     Solenoid Output    
6     Ride Control Solenoid 2 (ON/OFF)     Solenoid Output    
7     Start Relay     Solenoid Output    
8     Start Relay/Backup Alarm Return     Solenoid Output    
9     Secondary Steering Intermediate Relay     Sinking Driver Output    
10     Heated Mirror Relay     Sinking Driver Output    
11     Ride Control Indicator LED     Sinking Driver Output    
12     Unused (2)     -    
13     Machine Security System Red LED     Sinking Driver Output    
14     Alternator R Terminal     Output    
16     Transmission Oil Temp Sensor     Pulse Width Modulated    
19     Low Fuel Level Warning Indicator LED     Sinking Driver Output    
20     Transmission Oil Filter Bypass Indicator LED     Sinking Driver Output    
21     Neutralizer Disable Indicator LED     Sinking Driver Output    
23     Transmission Direction Control Switch (Neutral)     Switch Input    
25     Engine Speed Tach Wire (Freq)     Frequency Input    
28     Transmission Direction Control Switch (Reverse)     Switch Input    
29     Heated Mirror Switch     Switch Input    
30     Transmission Override Switch     Switch Input    
31     Neutralizer Disable Switch     Switch Input    
35     Left Pedal Position Sensor     Pulse Width Modulated    
36     Secondary Steering Test Switch     Switch Input    
37     Primary Steering Pressure Switch (N/O)     Switch Input    
38     Primary Steering Pressure Switch (N/C)     Switch Input    
39     CCS Auto 2     Switch Input    
44     CCS Auto 1-4     Switch Input    
45     Ride Control Switch (ON)     Switch Input    
46     Ride Control Switch (AUTO)     Switch Input    
49     Transmission Direction Control Switch (Forward)     Switch Input    
50     Parking Brake Oil Pressure Sensor     Pulse Width Modulated    
60     Secondary Steering Pressure Switch (N/O)     Switch Input    
61     Secondary Steering Pressure Switch (N/C)     Switch Input    
67     CAN A +     Power    
68     CAN A -     Ground    
( 2 ) All other pins that are not listed are also unused.