RELAY 2065374 - Caterpillar

2065374 RELAY Caterpillar parts ATS

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2065374
206-5374
2065374

Weight: 0.40 pounds 0 kg.

Buy RELAY 2065374 Caterpillar genuine, new aftermarket tractor parts with delivery
AUTOMATIC TRANS SWITCH,

Compatible equipment models: 2065374:

AUTOMATIC TRANS SWITCH ATS Caterpillar

Number on catalog scheme: 2

For full view, you need register

Information:

Do not crank the engine for more than 30 seconds. Allow the starter to cool for two minutes before cranking again. Turbocharger damage can result if the engine rpm is not kept low until the oil gauge display verifies that the oil pressure is sufficient.
Subsequent Engine Starting Procedures
Keep engine speed low until the engine oil pressure registers on the gauge or the engine oil indicator light goes out.If it does not register or the light does not go out within ten seconds, stop the engine and investigate the cause before starting again. Failure to do so, can cause engine damage.
Allow a cold engine to warm up at low idle for at least 5 minutes.
You can begin to operate the machine with a reduced load.
When the oil pressure reaches the normal operating range and the temperature gauge begins to move, you may operate the machine at full load.
Monitor the lights and the gauges frequently during operation.
Check oil levels in the power train, the engine, and the hydraulic systems when the oil is at operating temperature. Maintain the oil levels to the FULL marks.