2237267 RELAY AS Caterpillar parts
3208, 3304, 3304B, 3306B, 3406C, 3408, 3408C, 3412, 3412C, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C15, C175-20, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3408C, G3412, G350...
Rating:
Alternative (cross code) number:
CA2237267
223-7267
2237267
CA2237267
223-7267
2237267
GAS ENGINE, TRUCK ENGINE,
Compatible equipment models: 2237267:
Information:
Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket or another work tool for the principal intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock or gravel. Additional work tools allow this machine to perform other specific tasks.Specified Useful Life or Expected Life
The specified useful life, defined as total years of operation, or expected life, defined as total machine hours, of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machine’s specified useful life or expected life. The following items are required to obtain an economical specified useful life or expected life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.
Ensure that all frame cracks are identified, inspected, and repaired to prevent further development.Application/Configuration Restrictions
Refer to "Machine Data" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.The maximum fore and aft slope for proper lubrication is 25 degrees continuous and 35 degrees intermittent.This machine is approved for use in environments with no explosive gases.Machine Data
This machine is equipped with a C32 Engine.Basic machine specifications are listed below.
Table 1
993K Wheel Loader
Operating Weight 133810 kg (295000 lb)
Length with the Bucket 16050 mm (632 inch)
Width over the Tires 5080 mm (200 inch)
Height over the ROPS 6150 mm (242 inch)
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket or another work tool for the principal intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock or gravel. Additional work tools allow this machine to perform other specific tasks.Specified Useful Life or Expected Life
The specified useful life, defined as total years of operation, or expected life, defined as total machine hours, of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machine’s specified useful life or expected life. The following items are required to obtain an economical specified useful life or expected life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.
Ensure that all frame cracks are identified, inspected, and repaired to prevent further development.Application/Configuration Restrictions
Refer to "Machine Data" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.The maximum fore and aft slope for proper lubrication is 25 degrees continuous and 35 degrees intermittent.This machine is approved for use in environments with no explosive gases.Machine Data
This machine is equipped with a C32 Engine.Basic machine specifications are listed below.
Table 1
993K Wheel Loader
Operating Weight 133810 kg (295000 lb)
Length with the Bucket 16050 mm (632 inch)
Width over the Tires 5080 mm (200 inch)
Height over the ROPS 6150 mm (242 inch)
Cat SIS web machinery list:
Parts relay Caterpillar catalog:
9Y2921
RELAY
3114, 3116, 3126B, 3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, C-12, C13 XQ350, C1...
3114, 3116, 3126B, 3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, C-12, C13 XQ350, C1...
3T2170
RELAY AS
225, 225D, 229, 231D, 235B, 235C, 235D, 3116, 3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3512, 3516, 613C, 613C II, 615, 621, 769C, 772B, 776C, 789, 824C, 825C, 930R...
225, 225D, 229, 231D, 235B, 235C, 235D, 3116, 3208, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3512, 3516, 613C, 613C II, 615, 621, 769C, 772B, 776C, 789, 824C, 825C, 930R...
6T4006
RELAY AS
3408, 3412, 3508, 3512, 3516, 3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616, G379, G398, G399
3408, 3412, 3508, 3512, 3516, 3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616, G379, G398, G399
5N2124
RELAY-DELAY
3208, 3306, 3406, 3408, 3412, 3512
3208, 3306, 3406, 3408, 3412, 3512
9G1928
RELAY AS
3116, 3408, 814B, 815B, 816B, 950B, 950B/950E, 966D
3116, 3408, 814B, 815B, 816B, 950B, 950B/950E, 966D
0898084
RELAY
RT50
RT50
1234944
RELAY-TIME DELAY
3208, 3304, 3304B, 3306, 3306B, 3406C, 3408, 3408C, 3412, 3412C, 3512, 3516, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, PM3412, SR4
3208, 3304, 3304B, 3306, 3306B, 3406C, 3408, 3408C, 3412, 3412C, 3512, 3516, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, PM3412, SR4
1127959
RELAY-TIME DELAY
3208, 3304, 3304B, 3306, 3306B, 3406C, 3408, 3408C, 3412, 3412C, 3512, 3516, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, PM3412
3208, 3304, 3304B, 3306, 3306B, 3406C, 3408, 3408C, 3412, 3412C, 3512, 3516, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, PM3412
7L5219
RELAY
3508, 3512, 3512B, 3516, 3516B, D349, D399, G3508, G3512, G3516, G3516B, G3520B, G399, PMG3516
3508, 3512, 3512B, 3516, 3516B, D349, D399, G3508, G3512, G3516, G3516B, G3520B, G399, PMG3516
7C4378
RELAY-REVERSE POWER
3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3508B, 3512, 3512B, 3516, 3516B, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, G3516, P...
3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3508B, 3512, 3512B, 3516, 3516B, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, G3516, P...
5N5510
RELAY-REVERSE POWER
3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3508B, 3512, 3512B, 3516, 3516B, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, G3516, P...
3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3508, 3508B, 3512, 3512B, 3516, 3516B, C15, C18, G3304, G3306, G3306B, G3406, G3408, G3408B, G3412, G3508, G3512, G3516, P...
2236470
RELAY
3208, 3304, 3304B, 3306B, 3406C, 3408, 3408C, 3412, 3412C, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C15, C175-16, C175-20, C18, C27, C280-12, C280-16, C280-6, C280-8, C32, G3304, G33...
3208, 3304, 3304B, 3306B, 3406C, 3408, 3408C, 3412, 3412C, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C15, C175-16, C175-20, C18, C27, C280-12, C280-16, C280-6, C280-8, C32, G3304, G33...