RELAY 3770241 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5597 Anti-Seize Compound - Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01422096
Attach a suitable lifting device to turbocharger (7). The weight of turbocharger (7) is approximately 48 kg (105 lb).
Apply Tooling (A) to the threads of the mounting studs. Install a new gasket. Position Turbocharger (7) and install nuts (8).
Illustration 2 g01422255
Connect tube assemblies (5) and install clamp (6).
Illustration 3 g01422095
Install elbow assembly (1). Tighten clamps (2) and (3).
Install hose (4).
Close the engine access door on the right side of the machine.