RELAY-CONTROL 4851512 - Caterpillar

Illustration 2 g02817362
Fusion coupler
ISO Coupler
Illustration 3 g02817378
ISO coupler
Ride Control System (if equipped)
Illustration 4 g02816859
(2) Ride control button This optional feature allows the operator to stabilize the machine during operation while carrying a load on rough terrain. The ride control system is activated by a button (2) on the keypad in the operator station. The ride control system acts as a shock absorber by dampening forces from the bucket. When the key switch is turned off and back on again, ride control will keep the last setting.The speed range of the AUTO feature for the ride control system can be configured through ET.Refer to the machine OMM for further information.Tilt Control Function
Illustration 5 g02816976
(A) Tilt RACK BACK
(B) HOLD
(C) Tilt DUMP This standard feature allows the operator to dump and tilt back the worktool by using the joystick at the right hand of the operator.Tilt Kickout
Illustration 6 g03387243
(3) Tilt kickout button The operator can set the tilt kickouts by setting a detent using the joystick. Position the work tool at the desired tilt angle using