REMOTE GP 1411414 - Caterpillar

This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS5515" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
Termination Date
April 30, 2000Problem
If a cab windshield is broken and being replaced on certain 5130, 5130B, and 5230 Excavators, the cab frame needs to be inspected for flatness. If cab exceeds flatness specifications, the cab frame should be reworked to meet specifications.
Affected Product
Model & Identification Number
5130B (4CS130)
5130 (5ZL108-124)
5230 (7LL67-76)
Parts Needed
Not Applicable.
Action Required
Not Applicable.
Service Claim Allowances
This is a 2-hour job.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Attach.(1-Rework Procedure)Rework Procedure
1. Before replacing windshield, check cab frame for flatness. The surface flatness tolerance is 1mm between bolt holes using a straight edge and feeler gauge.2. If the cab frame does not meet the flatness tolerance, use a straight edge and a feeler gauge to determine high spots, then grind high areas on the cab frame surface to meet specification (1.0 mm).