REMOVER-PIN 1432459 - Caterpillar

1432459 REMOVER-PIN Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1432459
143-2459
1432459

Weight: 2 pounds 1 kg.

Buy REMOVER-PIN 1432459 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Genuine OEM Engine Mount Heat Shield for Audi 8T1399300

$83.59

02 Nov 2023
0.69[0.31] pounds
US: Newparts

Genuine OEM Engine Mount Heat Shield for Audi 8T1399300
Newparts

$75.21

19 Oct 2022
0.69[0.31] Pounds
US: Newparts

Genuine OEM Engine Mount Heat Shield for Audi 8T1399300
Newparts

Show more prices Caterpillar parts

This part in 1 request: Show. This information for suppliers only!

#1393032 1432459

2024-07-22

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the V-belt. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Description Qty
A 8S-2264 Puller 1
- Bolt 3
Illustration 1 g03796018
Illustration 2 g03796050
Illustration 3 g03796048
Remove bolts (2) from outer pulley (1). Remove outer pulley (1) from engine assembly.
Loosen nut (5). Note: Do not remove the nut at this time.
Install Tooling (A) to crankshaft pulley (5). Use Tooling (A) in order to remove crankshaft pulley (5) from crankshaft (6).
Remove Tooling (A).
Remove nut (5).
Remove pulley (4) from crankshaft (6).
Remove woodruff key (3) from crankshaft (6). Installation Procedure
Illustration 4 g03796048
Ensure that the following components are clean and free from damage: the taper of the crankshaft, the woodruff key and the bore of the crankshaft pulley. Replace any components that are damaged. Ensure that the taper of the crankshaft and the bore of the crankshaft pulley are clean and dry before assembly.
Inspect the crankshaft front seal for leaks, if necessary replace the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install woodruff key (3) to crankshaft (6).
Install crankshaft pulley (4) to crankshaft (6).
Lubricate nut (5) with clean engine oil and install the nut and tighten nut (5) to a torque of 333 N m (246 lb ft).
Illustration 5 g03796018
Install outer pulley (1) and install bolts (2).
Tighten bolts (2) to a torque of 78 N m (57.5 lb ft). End By:
Install the V-belt. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" for the correct procedure.