0995310 REPAIR KIT Caterpillar parts
E110B, E120B, E70B
Rating:
Alternative (cross code) number:
CA0995310
099-5310
0995310
CA0995310
099-5310
0995310
Weight: 0.50 pounds 0 kg.
EXCAVATOR,
You can buy:
US$61.00
29 Sep 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replace Parts 0995310 Stick Boom Cylinder Seal Kit for Caterpillar Excavator E120B (AikePart1025-0496)
Generic NOTE: It's a replacement parts, but it's not genujne || Model number is just for reference, Product will not work for every model. || Due to storage, there may be some minor scratches. || Part Number: for 0995310 87702 995310 995310-A || Model: for E70B E110B E120B
Generic NOTE: It's a replacement parts, but it's not genujne || Model number is just for reference, Product will not work for every model. || Due to storage, there may be some minor scratches. || Part Number: for 0995310 87702 995310 995310-A || Model: for E70B E110B E120B
0995310 Repair KIT (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.66 lbs || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.66 lbs || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Stevens Lake Parts One New Seal Kit Fits CAT, Fits Caterpillar E110B, E120B, E70B Models Interchangeable With 0995310, 87702, 995310, 995310-A, Boom LH, Boom Left Hand, Boom RH, Boom Right Hand, Booms
Stevens Lake Parts Rod: 75 Mm, Bore: 110 Mm || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
Stevens Lake Parts Rod: 75 Mm, Bore: 110 Mm || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
Number on catalog scheme:
31-41
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1 Start By:
Remove the valve lifter.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedure.
Illustration 1 g01228199
Disconnect harness assemblies (1). Remove bolts (2). Remove cover (3). Remove bolts (4). Remove lifting bracket (5).
Illustration 2 g01228201
Remove bolts (6). Remove cover (7).
Illustration 3 g01228235
Remove bolts (8). Remove bolt (9). Remove spacer (10). Remove cam gear (11).
Illustration 4 g01228236
Remove bolts (12) and the washers. Remove retainer (13).
Illustration 5 g03347755
Disconnect harness assemblies (14) and remove bracket assembly (15).
Illustration 6 g03347763
Disconnect hose assembly (16). Remove housing (17).
Illustration 7 g03347756
Remove all bolts (18) and housing assembly (19).
Illustration 8 g01228274
Typical Example
Illustration 9 g01228276
Typical Example
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (A) and leave the bolts loose. Install Tooling (B). Tighten the bolts for Tooling (A). Install Tooling (C). Use Tooling (C) in order to rotate the camshaft. Rotate the camshaft in order to remove the camshaft. Note: The camshaft can be removed from either end of the engine.
Illustration 10 g01228315
Remove camshaft (20) halfway from the engine. Use a suitable lifti
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1 Start By:
Remove the valve lifter.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedure.
Illustration 1 g01228199
Disconnect harness assemblies (1). Remove bolts (2). Remove cover (3). Remove bolts (4). Remove lifting bracket (5).
Illustration 2 g01228201
Remove bolts (6). Remove cover (7).
Illustration 3 g01228235
Remove bolts (8). Remove bolt (9). Remove spacer (10). Remove cam gear (11).
Illustration 4 g01228236
Remove bolts (12) and the washers. Remove retainer (13).
Illustration 5 g03347755
Disconnect harness assemblies (14) and remove bracket assembly (15).
Illustration 6 g03347763
Disconnect hose assembly (16). Remove housing (17).
Illustration 7 g03347756
Remove all bolts (18) and housing assembly (19).
Illustration 8 g01228274
Typical Example
Illustration 9 g01228276
Typical Example
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (A) and leave the bolts loose. Install Tooling (B). Tighten the bolts for Tooling (A). Install Tooling (C). Use Tooling (C) in order to rotate the camshaft. Rotate the camshaft in order to remove the camshaft. Note: The camshaft can be removed from either end of the engine.
Illustration 10 g01228315
Remove camshaft (20) halfway from the engine. Use a suitable lifti
Caterpillar parts catalog:
Parts repair Caterpillar catalog:
E110B, E120B, E200B, E240C, E300B, E70B, EL240B
E110B, E120B, E200B, E240C, EL240B
E120B
E110B, E120B
E110B
0855595
REPAIR KIT
E70B
E70B
5I9284
REPAIR KIT
E70B
E70B
0996617
REPAIR KIT
E70B
E70B
5I9539
REPAIR KIT
E70B
E70B
5I9285
REPAIR KIT
E70B
E70B
E70B
E70B
0997860
REPAIR KIT
E110B, E120B
E110B, E120B
0990341
REPAIR KIT
E110B, E120B
E110B, E120B
0990315
REPAIR KIT
E110B, E120B
E110B, E120B
0994740
REPAIR KIT
E120B
E120B
E110B, E120B
E200B, E240C, E300B
0934314
REPAIR KIT
E70, E70B
E70, E70B
E110B
E110B, E120B
E110B, E120B
E120B