REPAIR KT-YM 3744724 - Caterpillar

Illustration 1 g00496485
(1) Installation torque for nut (M12) ... 45 7 N m (33 5 lb ft) (2) Installation torque for two locknuts (M10) ... 14 4 N m (124 35 lb in) (3) Installation torque for four full nuts (M8) ... 7 2 N m (62 18 lb in) (6) Installation torque for two full nuts (M10) ... 14 4 N m (124 35 lb in)Adjustment Procedure
Put the lift control and tilt control valves in the HOLD position.
Adjust the length of rod assemblies (4) and (5) so that control rod (8) is in a vertical position on each side.
Adjust the length of rod assembly (7) so that control rod (8) is in a vertical position from the front to the rear.