REPAIR GP-LH 8U6254 - Caterpillar

Illustration 1 g00533419
Component Location for the Power Train (1) Torque Converter Output Speed Sensor (2) Impeller Clutch Solenoid (3) Lockup Clutch Solenoid (4) Location of the Power Train Electronic Control Module (ECM) for Wheel Loaders that are equipped with VIMS (5) Location of the Power Train Electronic Control Module (ECM) for Wheel Loaders that are equipped with Electronic Monitoring System (EMS) (6) Torque Converter Outlet Relief Valve (7) Transmission and Torque Converter Pump (8) Input Drive Shaft (9) Transmission Hydraulic Control ValveLocation of the Power Train Components
Note: For Wheel Loaders that are equipped with the Vital Information Management Systems (VIMS), the name which is used by the VIMS appears after the name of the component. The pressure switch for the parking brake "PARKBRK SW" is an example.
Illustration 2 g00533416
(4) Location of the Power Train ECM on VIMS equipped machines.The VIMS refers to the power train ECM as "TRN CTRL".The power train ECM is located in the electronics bay in the left side platform.
Illustration 3 g00583433
(5) Power Train ECM on EMS equipped machinesThe power train ECM is located behind the cab on Wheel Loaders that are equipped with the EMS.
Illustration 4 g00533422
(1) Torque Converter Output Speed Sensor. (2) Impeller Clutch Solenoid. (3) Lockup Clutch Solenoid. (6) Torque Converter Outlet Relief Valve. (7) Transmission and Torque Converter Pump. (8) Input Drive Shaft. The VIMS refers to the impeller clutch solenoid as "TC IMPLR SOL".The VIMS refers to the lockup clutch solenoid as "TC LCKUP SOL".The VIMS refers to the torque converter output speed sensor as "TC OUT SPD".
Illustration 5 g00514653
Location of the Pressure Sensor for the Impeller Clutch The VIMS refers to the pressure sensor for the impeller clutch as "IMPLR CLCH PRES".The pressure sensor for the impeller clutch is located on the torque converter.