RESISTOR 2S0945 - Caterpillar

Illustration 1 g03429420
Table 1
Specification for 254-1352 Piston Motor Gp
Item Qty Part Specification Description
- - - Rotation is Bi-Directional.
- - - Maximum displacement per revolution is 80.0 cc (4.9 cubic inch ).
- - - Minimum displacement per revolution is 28.0 cc (1.7 cubic inch).
1 8 095-0674 Bolt Torque to 87 15 N m (64 11 lb ft).
2 2 - Tighten the nut to 3.0 0.3 N m (26.6 2.7 lb in).
Minimum breakaway torque is 2.7 N m (23.9 lb in).
3 4 8C-6965 Bolt Torque to 10.4 0.8 N m (92.0 7.1 lb in).
4 1 9S-8004 O-Ring Plug Torque to 25 2 N m (221 18 lb in).
5 As required, use the following shims to achieve 5 L/min (1.32085 US gpm) at 2500 kPa (363 psi) flow through valve:
1 124-9905 Shim Thickness is 0.3 mm (0.01 inch).
1 124-9906 Shim Thickness is 0.5 mm (0.02 inch).
1 124-9904 Shim Thickness is 1.0 mm (0.04 inch).
6 4 129-3181 Bolt Torque to 75 N m (55 lb ft).
7 14 113-4419 Special Screw Before assembly, apply blue Loctite 242 to the threads.
Torque to 9.1 0.7 N m (80.5 6.2 lb in).
8 If rotating group is not replaced as a complete package, use appropriate single shim to provide clearance dimension (E) of 0.20 0.05 mm (0.008 0.002 inch), when rotating group is assembled into motor.
1 123-5773 Shim Thickness is 3.50 mm (0.138 inch).
1 123-5774 Shim Thickness is 3.60 mm (0.142 inch).
1 123-5775 Shim Thickness is 3.70 mm (0.146 inch).
1 123-5776 Shim Thickness is 3.80 mm (0.150 inch).
1 123-5777 Shim Thickness is 3.90 mm (0.154 inch).
1 123-5778 Shim Thickness is 4.00 mm (0.157 inch).