RESISTOR AS 7Y5462 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     5P-0960     Grease Cartridge        Note: Apply Tooling (A) to all of the pin bores and lip seals.
Move the machine forward. Align the bores of the arm assembly with the bores of the bucket.
Illustration 1 g00648975
Illustration 2 g00655584
Note: Install washers (3) and (4) in order to minimize the gap to less than 1.60 mm (0.063 inch) between the arm assembly and the bucket. There must be at least one washer on each side of the arm assembly.
Position washers (4) and (3) .
Illustration 3 g00648971
Install pin assembly (2) and bolt (1) .
Repeat Steps 2 and 3 for the opposite side of the arm assembly.
Illustration 4 g01122325
Align the bore of link assembly (5) with the bores of the bucket.
Install pin assembly (6) and bolt (7) .