RESTRICTOR 3249925 - Caterpillar

Use two hose clamps (24) to attach two lines (23) .
Illustration 8 g00842849
Install foam (22) .
Illustration 9 g00842848
Use four bolts (20) and the locknuts to install connector (21) .
Illustration 10 g00842847
Install cover (19) that is located behind the seat in the cab.
Illustration 11 g00842846
Install cover (18) .
Illustration 12 g00841528
Connect two air conditioner lines (17) .
Illustration 13 g00841527
Connect hydraulic line (16) to the back of the selector valve.
Connect hydraulic line (15) to the back of the shuttle valve.
Illustration 14 g00841525
Connect two electrical connectors (14) .
Illustration 15 g00841524
Connect hydraulic lines (12) to selector valve (13) .
Illustration 16 g00843001
Connect electrical connector (10). Use bolt (11) to hold electrical connector (10) in position.
Illustration 17 g00841523
Connect hydraulic lines (8) to shuttle valve (9) .
Illustration 18 g00842999
Rotate cover (7) into position. Install six bolts into cover (7). Tighten the seven bolts.
Illustration 19 g00842959
Connect three hydraulic lines to the bottom of pilot valve (6) .
Connect two hydraulic lines (4) to the side of pilot valve (6) .
Repeat steps 21 and 22 for the other pilot valve.
Illustration 20 g00830069
Use two people to install the guard on the headlights. The weight of the guard is 9 kg (20 lb).
Install two bolts in the center of the guard. Install two bolts on each side of the guard.
Illustration 21 g00841522
Use bolt (2) to install the light.
Connect electrical connector (3) .
Close light cover (1) and install the two bolts.
Repeat steps 26 through 28 for the remaining light.
Charge the air conditioner system. The correct charge is 1.7 kg (3.75 lb). Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.