RETAINER 0010317 - Caterpillar

Illustration 1 g01120887
Press "OK". The "Light Bar Connections" dialog will be shown on the Display.
Connect the Light Bar for the required position. Disconnect all the other Light Bars.
Press "SET" for the connected Light Bar. A pattern of LED indicator lights on the Light Bar are illuminated on the connected Light Bar. This should match the pattern that is shown in Illustration 1. If the LED indicator lights on the Light Bar are illuminated at the wrong end, press "INVERT".
Disconnect the Light Bar.
Repeat Steps 5 through 7 in order to set the next two Light Bars.
Press "OK" in order to save the settings and return to the "Setup Menu - Installation" dialog.
Press "ESC" in order to exit the "Setup Menu - Installation". All changes take effect immediately.
When all the Light Bars are set, reconnect all of the Light Bars.