RETAINER, BALL 0963995 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     422-5660     Lifting Eye Assembly     1    
B     -     Loctite C5A
Cooper Anti-Seize     -    
C     -     Loctite
Nickel Anti Seize     -    
Illustration 1 g03332752
Use Tooling (A) and a suitable lifting device to install turbocharger (12). The weight of turbocharger (12) is approximately 300 kg (662 lb).Note: Inspect the gaskets for wear or damage. If necessary, replace with new gaskets.
Install bolts (13) .
Illustration 2 g03332705
Install tube assembly (11) and the O-ring seal.
Illustration 3 g03332702
Install bracket (10). Apply Tooling (B) onto nuts (9). Install nuts (9). Tighten bolts (9) to a torque of 65 5 N m (48 4 lb ft).
Illustration 4 g03332691
Apply Tooling (C) onto bolts (8). Install bolts (8). Tighten bolts (8) to a torque of 50 10 N m (37 7 lb ft).
Illustration 5 g03332690
Install bolts (7) .
Illustration 6 g03332420
Install elbow (6). Connect V-band clamp (5). Tighten clamps (4) .
Illustration 7 g03332417
Connect tube assembly (3) .
Illustration 8 g03332415
Connect tube assembly (2) and tube assembly (1) .
Fill the coolant from the engine. Refer to Operation and Maintenance Manual, "Cooling System Coolant (NGEC) - Change".End By: Install the manifold shield.