1346033 RETAINER Caterpillar parts
D11R, D11T
Rating:
Alternative (cross code) number:
CA1346033
134-6033
1346033
CA1346033
134-6033
1346033
Weight: 1 pounds 0 kg.
Information:
MATERIAL THICKNESS
10
mm
NUMBER OF PITCH HOLES
2
OD
95.25
mm
PITCH CIRCLE DIAMETER
38.1
mm
PITCH CIRCLE HOLE DIAMETER
17
mm
TRACK-TYPE TRACTOR,
Number on catalog scheme:
39
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01386297
Ensure that the O-ring seal is in position on elbow (8). Coat the O-ring seal with clean engine oil. Note: Before you install the engine oil pump, make sure that the shaft of the pump will turn by hand. The pump must have oil for lubrication before the pump is installed.
Use two people in order to install engine oil pump (10). The weight of engine oil pump (10) is approximately 36 kg (79 lb). Place engine oil pump (10) and elbow (8) into position. Make sure that the splines of the engine oil pump are properly meshed with the splines of the drive for the engine oil pump. Install bolts (9) that secure engine oil pump (10) and elbow (8).
Install bolts (7) to secure engine oil pump (10).
Make sure that the O-ring seal is in position on the tube and elbow (1). Coat the O-ring seals with clean engine oil. Install bolts (2).
Position adapter (5). Ensure that the gasket is in place and install bolts (3). Install bolts (4) and (6).
Fill the cooling system. Refer to the Operation and Maintenance Manual, "Refill Capacities". End By:
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01386297
Ensure that the O-ring seal is in position on elbow (8). Coat the O-ring seal with clean engine oil. Note: Before you install the engine oil pump, make sure that the shaft of the pump will turn by hand. The pump must have oil for lubrication before the pump is installed.
Use two people in order to install engine oil pump (10). The weight of engine oil pump (10) is approximately 36 kg (79 lb). Place engine oil pump (10) and elbow (8) into position. Make sure that the splines of the engine oil pump are properly meshed with the splines of the drive for the engine oil pump. Install bolts (9) that secure engine oil pump (10) and elbow (8).
Install bolts (7) to secure engine oil pump (10).
Make sure that the O-ring seal is in position on the tube and elbow (1). Coat the O-ring seals with clean engine oil. Install bolts (2).
Position adapter (5). Ensure that the gasket is in place and install bolts (3). Install bolts (4) and (6).
Fill the cooling system. Refer to the Operation and Maintenance Manual, "Refill Capacities". End By:
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
Caterpillar parts catalog:
Parts retainer Caterpillar catalog:
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793C, 793D, 797, 797B, 854G, 992G, 994D, 994F...
24M, 3412D, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651B, 657E, 657G, 73...
24M, 323D L, 323D2 L, 330D L, 336D L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 637D,...
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 235, 235C, 245, 3304, 3304B, 3306, 3606, 3608, 5130, 5130B, 5230, 5230B, 528, 528B, 530B, 561C, 561D, 572G, 578, 589, 594, 594H, 613, 621, 621E, 621F, 621R, 62...
578, 583K, 589, 594H, 8U, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8H, D8K, D8L, D9G, D9H, D9L, D9N, D9R, D9T
10, 10S, 527, 854G, 854K, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D5H, D5H XL, D5HTSK II, D9L
631D, 631E, 631G, 637E, 637G, 641B, 651B, 657B, 657E, 657G, 854G, 8B, 8D, 950, 9B, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D7H, D7R, D8K, D8L, D8N, D8R, D8R II, D8T, D9H, D9L, D9N, D9R
329D L, 345C, 345C L, 345D L, 365B, 365B II, 365C, 365C L, 365C L MH, 375, 385B, 385C, 385C FS, 385C L, 5080, 5090B, 5130, 980H, 980K, 994, 994D, 994F, 994H, D11R, D11T
375, 854G, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9R, D9T
374D L, D11N, D11R, D11T, D9L
D10, D11N, D11R, D11T
854G, 854K, D11N, D11R, D11T
1346036
RETAINER
D11R, D11T
D11R, D11T
D10, D11N, D11R, D11T
9J1557
RETAINER AS
824C, 824G, 824G II, 824H, 824K, 834B, 834G, 834H, 834K
824C, 824G, 824G II, 824H, 824K, 834B, 834G, 834H, 834K
3097680
RETAINER
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
2619675
RETAINER AS
D10R, D10T, D10T2
D10R, D10T, D10T2
D9R, D9T
2045121
RETAINER
854G, 854K, D11R, D11T
854G, 854K, D11R, D11T
2045120
RETAINER
854G, 854K, D11R, D11T
854G, 854K, D11R, D11T
2045119
RETAINER
854G, 854K, D11R, D11T
854G, 854K, D11R, D11T
2045117
RETAINER
854G, 854K, D11R, D11T
854G, 854K, D11R, D11T
844, 844H, 844K, D8L
1881452
RETAINER AS
D11N, D11R, D11T
D11N, D11R, D11T