1564215 RETAINER Caterpillar parts
D10R, D10T, D10T2
Rating:
Alternative (cross code) number:
CA1564215
156-4215
1564215
CA1564215
156-4215
1564215
Weight: 157 pounds 71 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$9.99
02 Jul 2023
CN: 沈立英
4Pcs Car Wheel Tire Valve Stem Caps Logo Personality Modification Valve Cap Modeling Accessories Suit for Mercedes Benz A-Class C-Class E-Class CLA CLS AMG GLC GLE GLS Metal Black Accessories
KUKUUU ✔Material: The valve cover is made of aluminum alloy, corrosion-resistant and durable. Quantity: 4pcs/package. || ✔Easy Installrion：Easy to Install or Remove without Any ToolsEveryone Can Screw Car Wheel Caps on Tire Valve Stem In Seconds || ✔Safe ：Our Stem Caps has rubber rings.Preventing the flat tire and ensure stable tire pressure, ensure safe driving || ✔Function: Protect the valve core from corrosion due to direct contact with clay water and snow Prevent tire air leakage and ensure stable tire pressure. || ✔Service: 100% Satisfaction Guarantee, every product we sell will be rigorously tested Service: Guarantee that every product we sell will be rigorously tested before being sold
KUKUUU ✔Material: The valve cover is made of aluminum alloy, corrosion-resistant and durable. Quantity: 4pcs/package. || ✔Easy Installrion：Easy to Install or Remove without Any ToolsEveryone Can Screw Car Wheel Caps on Tire Valve Stem In Seconds || ✔Safe ：Our Stem Caps has rubber rings.Preventing the flat tire and ensure stable tire pressure, ensure safe driving || ✔Function: Protect the valve core from corrosion due to direct contact with clay water and snow Prevent tire air leakage and ensure stable tire pressure. || ✔Service: 100% Satisfaction Guarantee, every product we sell will be rigorously tested Service: Guarantee that every product we sell will be rigorously tested before being sold
$378.45
09 Aug 2022
5.4277[2.44] Pounds
US: Motomentum
Rekluse TorqDrive Clutch Pack for Yamaha YZ250F 2019-2020 RMS-2807002
Rekluse Stronger Drive Throughout The Power Band – Gain Power Without Any Expensive Motor Mods || Virtually Eliminates Clutch Fade || Package Weight: 2462.0 grams || Country of Origin : United States
Rekluse Stronger Drive Throughout The Power Band – Gain Power Without Any Expensive Motor Mods || Virtually Eliminates Clutch Fade || Package Weight: 2462.0 grams || Country of Origin : United States
Number on catalog scheme:
18
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01361765
Attach a suitable lifting device to cylinder head (7) . The weight of cylinder head (7) is approximately 147 kg (325 lb). Position cylinder head (7) .
Illustration 2 g01361697
Note: Examine bolts (5) for wear or for damage. Refer to Reuse And Salvage Guidelines, SEBF8301, "Inspection and Reuse of Critical Fasteners Used in All Engines". Replace with new bolts (5) , if necessary.
Install bolts (5) and install bolts (6) .
Illustration 3 g02083414
Bolt tightening sequenceNote: Lubricate the bolts with clean engine oil prior to assembly.
Tighten bolt (1) through bolt (26) in a numerical sequence.Tighten the bolts to the following torque. ... 160 15 N m (118 11 lb ft)
Tighten bolt (1) through bolt (26) again in a numerical sequence.Tighten the bolts again to the following torque. ... 160 15 N m (118 11 lb ft)
Place a mark on bolt (1) through bolt (26) . Rotate bolt (1) through bolt (26) in a numerical sequence.Rotate the bolts in the clockwise direction. ... 90 degrees (1/4 turn)
Loosen bolt (1) through bolt (26) until the washers are loose under the bolt heads.
Tighten bolt (1) through bolt (26) in a numerical sequence.Tighten the bolts to the following torque. ... 160 15 N m (118 11 lb ft)
Tighten bolt (1) through bolt (26) again in a numerical sequence.Tighten the bolts again to the following torque. ... 160 15 N m (118 11 lb ft)
Place a mark on bolt (1) through bolt (26) . Rotate bolt (1) through bolt (26) in a numerical sequence.Rotate the bolts in the clockwise direction. ... 90 degrees (1/4 turn)
Tighten bolt (27) through bolt (32) in a numerical sequence.Tighten the bolts to the following torque. ... 28 7 N m ( 21 5 lb ft)
Illustration 4 g01361667
Position bracket (2) and install bolts (3) .
Install bolts (4) .
Illustration 5 g01361659
Install tube assembly (1) .End By:
Install the unit injectors.
Install the rocker arm and shaft.
Install the inlet manifold.
Install the fuel filter base.
Install the fuel rail and the fuel manifold.
Install the fan drive mounting group.
Install the exhaust manifold.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01361765
Attach a suitable lifting device to cylinder head (7) . The weight of cylinder head (7) is approximately 147 kg (325 lb). Position cylinder head (7) .
Illustration 2 g01361697
Note: Examine bolts (5) for wear or for damage. Refer to Reuse And Salvage Guidelines, SEBF8301, "Inspection and Reuse of Critical Fasteners Used in All Engines". Replace with new bolts (5) , if necessary.
Install bolts (5) and install bolts (6) .
Illustration 3 g02083414
Bolt tightening sequenceNote: Lubricate the bolts with clean engine oil prior to assembly.
Tighten bolt (1) through bolt (26) in a numerical sequence.Tighten the bolts to the following torque. ... 160 15 N m (118 11 lb ft)
Tighten bolt (1) through bolt (26) again in a numerical sequence.Tighten the bolts again to the following torque. ... 160 15 N m (118 11 lb ft)
Place a mark on bolt (1) through bolt (26) . Rotate bolt (1) through bolt (26) in a numerical sequence.Rotate the bolts in the clockwise direction. ... 90 degrees (1/4 turn)
Loosen bolt (1) through bolt (26) until the washers are loose under the bolt heads.
Tighten bolt (1) through bolt (26) in a numerical sequence.Tighten the bolts to the following torque. ... 160 15 N m (118 11 lb ft)
Tighten bolt (1) through bolt (26) again in a numerical sequence.Tighten the bolts again to the following torque. ... 160 15 N m (118 11 lb ft)
Place a mark on bolt (1) through bolt (26) . Rotate bolt (1) through bolt (26) in a numerical sequence.Rotate the bolts in the clockwise direction. ... 90 degrees (1/4 turn)
Tighten bolt (27) through bolt (32) in a numerical sequence.Tighten the bolts to the following torque. ... 28 7 N m ( 21 5 lb ft)
Illustration 4 g01361667
Position bracket (2) and install bolts (3) .
Install bolts (4) .
Illustration 5 g01361659
Install tube assembly (1) .End By:
Install the unit injectors.
Install the rocker arm and shaft.
Install the inlet manifold.
Install the fuel filter base.
Install the fuel rail and the fuel manifold.
Install the fan drive mounting group.
Install the exhaust manifold.
Caterpillar parts catalog:
Parts retainer Caterpillar catalog:
578, 583K, 589, 594H, 8U, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8H, D8K, D8L, D9G, D9H, D9L, D9N, D9R, D9T
589, D10N, D10R
589, D10N, D10T, D10T2, D7H, D8L, D9L, D9N, D9R
10, 10S, 527, 854G, 854K, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D5H, D5H XL, D5HTSK II, D9L
153, 173B, 518, 518C, 528, 528B, 530B, 561H, 561M, 572G, 611, 613C, 613C II, 613G, 615C, 623B, 631C, 650B, 814, 814F, 814F II, 815, 815B, 815F, 815F II, 816F, 816F II, 824C, 825C, 844, 844H, 844K, 916...
615, 615C, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 633D, 639D, 641B, 651E, 657E, 657G, 772, 824C, 826C, 966C, 966D, 966F, 966F II, 970F, 973, 977K, 977L, 980B, 980G, 99...
631D, 631E, 631G, 637E, 637G, 641B, 651B, 657B, 657E, 657G, 854G, 8B, 8D, 950, 9B, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D7H, D7R, D8K, D8L, D8N, D8R, D8R II, D8T, D9H, D9L, D9N, D9R
173B, 183B, 844, 844H, 844K, D10N, D10R, D10T, D7G, D8L, D9H, D9L, D9N
375, 854G, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9R, D9T
814S, 824S, 854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
D10N, D10R, D10T, D10T2, D8L, D9L, D9N, D9R, D9T
D10N, D10R, D9L
1140325
RETAINER
D10R, D10T, D10T2
D10R, D10T, D10T2
1262846
RETAINER
D10R
D10R
1466204
RETAINER
24H, D10N, D10R, D11R, D11T
24H, D10N, D10R, D11R, D11T
8E3147
RETAINER
D8R, D8T
D8R, D8T
1838390
RETAINER-SPRING
D8R, D8R II
D8R, D8R II
1409925
RETAINER
D11R
D11R
1998194
RETAINER
D8R, D8T
D8R, D8T
3374042
RETAINER AS
D8R, D8T
D8R, D8T
1299247
RETAINER
D10R, D10T, D10T2
D10R, D10T, D10T2
1060476
RETAINER
D10R, D10T, D10T2
D10R, D10T, D10T2