RETAINER 1916427 - Caterpillar

1. Cut tie-wrap (1). 2.Disconnect two electrical connections (2). 3. Disconnect fuel line (3). Cap or plug immediately. 4. Remove four bolts (4) and washers.5. Remove left extender assembly burner group (5). 6. Left extender assembly burner group (5) upon removal. The following additional steps are only for the removal of right extender assembly burner group. 7. Remove bolt (6).8. Disconnect two hose assemblies (7). Cap or plug immediately. 9. Disconnect the other end of the two hose assemblies (7) to allow clearance for the right extender assembly burner group. For installation of the left or right extender assembly burner group, reverse the removal steps.