RETAINER 1J2098 - Caterpillar

Use caution to avoid possible personal injury when adjusting the bucket positioner.Stop the engine and lower all equipment to relieve the hydraulic pressure.Engage the parking brake and block the tires to prevent sudden movement of the machine.Keep unauthorized personnel off the machine.
Illustration 1 g00996509
Press the top of switch (1) in order to actuate the bucket positioner.
Start the engine. Lower the bucket to the ground. Position the bucket at the desired angle to the ground.
Turn the engine start switch to the OFF position and remove the key. Move the tilt control lever to the TILT BACK detent position.
Illustration 2 g00501777
Loosen three bolts (2) that clamp tube (5) to the rod end of the tilt cylinder. Move the tube down the cylinder in order to increase the digging angle. Move switch (3) up the cylinder in order to decrease the digging angle.Note: Switch (3) is for the bucket positioner. Switch (4) is for the attachment positioner.
To test the adjustment, start the engine and raise the bucket. Move the tilt control lever to the TILT BACK detent position.When the bucket reaches the preset digging angle, the tilt control lever should return to the HOLD position.