1U2405 RETAINER-GET Caterpillar parts
12G, 140B, 16G, 16H NA, 227, 229, 235C, 235D, 24H, 631E, 631G, 633E, 637E, 637G, 651E, 657E, 963, 973, D5E, D5H, D5H XL, D5M, D6D, D6E, D6G SR, D6H, D6H II, D6H XL, D6H XR, D6M, D6R, D7G, D7H, E110, E...
Rating:
Alternative (cross code) number:
CA1U2405
1U-2405
1U2405
CA1U2405
1U-2405
1U2405
Weight: 0.09 pounds 0 kg.
EXCAVATOR, WHEEL SCRAPER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
for 9W2668 & 1U2405 Pin & Retainer Set Fits Caterpillar Fits CAT Ripper Tooth 6Y
BEAR FLAG EDITION For 9W2668 & 1U2405 Pin & Retainer Set Fits Caterpillar Fits CAT Ripper Tooth 6Y || High-quality oxygen sensor for Nissan Altima and Sentra models, designed to improve fuel efficiency and engine performance. || Direct-fit oxygen sensor with OE-style connectors for easy installation, compatible with MPN 234-3011. || Enhance Your Equipment’s Performance – Opt for Our Reliable Replacement Parts. || For a precise fit and inFor med choice, please thoroughly check the product's dimensions and inspect the provided photos.
BEAR FLAG EDITION For 9W2668 & 1U2405 Pin & Retainer Set Fits Caterpillar Fits CAT Ripper Tooth 6Y || High-quality oxygen sensor for Nissan Altima and Sentra models, designed to improve fuel efficiency and engine performance. || Direct-fit oxygen sensor with OE-style connectors for easy installation, compatible with MPN 234-3011. || Enhance Your Equipment’s Performance – Opt for Our Reliable Replacement Parts. || For a precise fit and inFor med choice, please thoroughly check the product's dimensions and inspect the provided photos.
20 SECOND SOAP for 1U2405 Retainer Fits Caterpillar
20 SECOND SOAP For 1U2405 Retainer Fits Caterpillar || Retainer desied for U2405 model, eres secure fit and optimal perforce, cpatible with equipment. || Made with materia, provides lasting durability and reliability, easy to install for efficient maintenance. || Restore your device’s functionality with our replacement components. || Upgrade your tools for better performance with our trusted replacement options.
20 SECOND SOAP For 1U2405 Retainer Fits Caterpillar || Retainer desied for U2405 model, eres secure fit and optimal perforce, cpatible with equipment. || Made with materia, provides lasting durability and reliability, easy to install for efficient maintenance. || Restore your device’s functionality with our replacement components. || Upgrade your tools for better performance with our trusted replacement options.
ACTIVLIFE for 8E6359 1U2405 6Y9459 J350 Retainer Fits Caterpillar Fits CAT Ripper Tooth 6Y0309
ACTIVLIFE For 8E6359 1U2405 6Y9459 J350 Retainer Fits Caterpillar Fits CAT Ripper Tooth 6Y0309 || Replacement retainer desied for and ripper tooth mode, cpatible with 8E6359, 1U2405, and 6Y9459 MPNs. Enhances functionality and durability of J350 Ripper Tooth. || Made fr materia to ere a secure fit and reliable perforce. Easy to install and cpatible with 6Y0309 MPN. || Upgrade your mowing experience with our premium lawnmower parts. || For your complete satisfaction, please visually inspect the parts in the photo and ensure they align with the provided dimensions.
ACTIVLIFE For 8E6359 1U2405 6Y9459 J350 Retainer Fits Caterpillar Fits CAT Ripper Tooth 6Y0309 || Replacement retainer desied for and ripper tooth mode, cpatible with 8E6359, 1U2405, and 6Y9459 MPNs. Enhances functionality and durability of J350 Ripper Tooth. || Made fr materia to ere a secure fit and reliable perforce. Easy to install and cpatible with 6Y0309 MPN. || Upgrade your mowing experience with our premium lawnmower parts. || For your complete satisfaction, please visually inspect the parts in the photo and ensure they align with the provided dimensions.
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 1U2405:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B Plate
50.8 mm (2 inches) x 102 mm (4 inches) x 6 mm (0.25 inches) 2
C 1P-1857 Retaining Ring Pliers 1
D Tube
57 mm (2.25 inch) diameter x 6 mm (0.25 inch) thick wall x 203 mm (8 inches) long 1
E 1P-0510 Driver Group 1
F 2S-3230 Bearing Lubricant
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Thoroughly clean all of the parts. Apply Tooling (F) to all of the bearings and the drive assembly. Before assembly, coat all of the other parts with an SAE 10 grade of oil.
Illustration 1 g01054313Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
Install O-ring seals (54) on rotor cylinder (53). Install rotor cylinder (53) into motor housing (3). Orient pin (55) of rotor cylinder (53) with slot (56) in motor housing (3).
Illustration 2 g00598181
Install O-ring seal (52) onto rotor cylinder (53).
Illustration 3 g00598221
Install rear end plate (45) on the shaft of rotor (48).
Illustration 4 g01054318Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (46) over the shaft of rotor (48).
Illustration 5 g01054320
Install bearing (44) over the shaft of rotor (48). The bearing will fit into the rear end plate.
Illustration 6 g01054321
Install rotor clamp nut (42) on the shaft of rotor (48). Orient the shoulder of nut (42) toward the bearing.
Illustration 7 g00598201
Tighten the rotor clamp nut in order to obtain a clearance of 0.03 to 0.08 mm (0.001 to 0.003 inch) between the rear end plate and the rotor. Measure the clearance with a feeler gauge. Tighten hex socket head bolt (43) into the rotor clamp nut. Measure the clearance again.
Illustration 8 g00598207
Install rotor (48) into motor housing (3). Align pin (57) into the slot of the rear end plate.
Illustration 9 g01054297
Install vanes (47) into rotor (48).
Illustration 10 g01054327
Install front end plate (50) onto rotor (48). Align small hole (58) of front end plate (50) onto rotor pin (59).
Illustration 11 g00598420
Install washers (51) over the shaft of the rotor onto the front end plate.
Illustration 12 g00598225
Place bearing (49) onto the front end plate.
Illustration 13 g00598445
Use Tooling (E) and a suitable press in order to complete the installation of bearing (49).
Illustration 14 g00598227
Install rotor pinion (40) with the hex head bolt. Tighten the bolt to a torque of 120 N m (90 lb ft).
Illustration 15 g00598230Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (60) onto the rotor bearing that is on the rear end plate. Install cover (39) onto motor housing (3).
Illustration 16 g00598232
Install bearing (33) and new ring (32) onto drive shaft (17).
Illustration 17 g00598234
Use Tooling (D) with a suitable press in order to complete the installation of the new ring.
Illustration 18 g00598241
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install these parts into drive shaft (17): bolt (23), lockwasher (24), washer
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B Plate
50.8 mm (2 inches) x 102 mm (4 inches) x 6 mm (0.25 inches) 2
C 1P-1857 Retaining Ring Pliers 1
D Tube
57 mm (2.25 inch) diameter x 6 mm (0.25 inch) thick wall x 203 mm (8 inches) long 1
E 1P-0510 Driver Group 1
F 2S-3230 Bearing Lubricant
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Thoroughly clean all of the parts. Apply Tooling (F) to all of the bearings and the drive assembly. Before assembly, coat all of the other parts with an SAE 10 grade of oil.
Illustration 1 g01054313Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
Install O-ring seals (54) on rotor cylinder (53). Install rotor cylinder (53) into motor housing (3). Orient pin (55) of rotor cylinder (53) with slot (56) in motor housing (3).
Illustration 2 g00598181
Install O-ring seal (52) onto rotor cylinder (53).
Illustration 3 g00598221
Install rear end plate (45) on the shaft of rotor (48).
Illustration 4 g01054318Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (46) over the shaft of rotor (48).
Illustration 5 g01054320
Install bearing (44) over the shaft of rotor (48). The bearing will fit into the rear end plate.
Illustration 6 g01054321
Install rotor clamp nut (42) on the shaft of rotor (48). Orient the shoulder of nut (42) toward the bearing.
Illustration 7 g00598201
Tighten the rotor clamp nut in order to obtain a clearance of 0.03 to 0.08 mm (0.001 to 0.003 inch) between the rear end plate and the rotor. Measure the clearance with a feeler gauge. Tighten hex socket head bolt (43) into the rotor clamp nut. Measure the clearance again.
Illustration 8 g00598207
Install rotor (48) into motor housing (3). Align pin (57) into the slot of the rear end plate.
Illustration 9 g01054297
Install vanes (47) into rotor (48).
Illustration 10 g01054327
Install front end plate (50) onto rotor (48). Align small hole (58) of front end plate (50) onto rotor pin (59).
Illustration 11 g00598420
Install washers (51) over the shaft of the rotor onto the front end plate.
Illustration 12 g00598225
Place bearing (49) onto the front end plate.
Illustration 13 g00598445
Use Tooling (E) and a suitable press in order to complete the installation of bearing (49).
Illustration 14 g00598227
Install rotor pinion (40) with the hex head bolt. Tighten the bolt to a torque of 120 N m (90 lb ft).
Illustration 15 g00598230Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (60) onto the rotor bearing that is on the rear end plate. Install cover (39) onto motor housing (3).
Illustration 16 g00598232
Install bearing (33) and new ring (32) onto drive shaft (17).
Illustration 17 g00598234
Use Tooling (D) with a suitable press in order to complete the installation of the new ring.
Illustration 18 g00598241
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install these parts into drive shaft (17): bolt (23), lockwasher (24), washer
Caterpillar parts catalog:
Parts retainer Caterpillar catalog:
120B, 12E, 140B, 14E
120B, 12E, 140B, 14E
120B, 12E, 140B, 14E
120B, 12E, 140B, 14E
120, 120B, 12E, 12F, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12F, 140B, 14E
120G, 12G, 130G, 14G, 16G
12G, 130G, 14G, 16G
14G, 16G
120G, 14G, 16G
120B, 140B
8E1856
RETAINER
231D, 320 L, 322 FM L, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L
231D, 320 L, 322 FM L, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L
231D, 245D, 320, 320 L, 320B, 320C, 322 FM L, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B L
7I7321
RETAINER
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 31...
311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 31...
1174523
RETAINER
312
312
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
5S1873
RETAINER
G353D, G379
G353D, G379
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 313B, 314C, 314D CR, 314D LCR, 315, 315B, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318D L
7I7780
RETAINER
311, 312, E110B, E120B
311, 312, E110B, E120B
7Y2162
RETAINER
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 323D LN, E110B, E120B
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 323D LN, E110B, E120B
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B, 3...
0957382
RETAINER
311C, 311D LRR, 311F LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L,...
311C, 311D LRR, 311F LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L,...
7I1085
RETAINER
312, 312B, 313B
312, 312B, 313B