2433177 RETAINER Caterpillar parts
336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E L, 349E L VG, 349F L, 374D L, 374F L, 390D, 390D L, 390F L, 824G II, 824H, 834H, 836H, 836K, 953D, 963D, 973...
Rating:
Alternative (cross code) number:
CA2433177
243-3177
2433177
CA2433177
243-3177
2433177
Weight: 0.010 pounds 0 kg.
Information:
DASH SIZE
0
FLANGE DIAMETER
32
mm
HEX SIZE
17
mm
OVERALL LENGTH
15.2
mm
SHOULDER LENGTH
12.2
mm
THREAD SIZE
M30X1.5
EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 2433177:
Number on catalog scheme:
19
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00938243
Illustration 2 g00606467
Remove valve assembly (1) from piston cooling jet (2).
Remove piston cooling jet (2) from the cylinder block. Note: The engine crankshaft may be rotated in order to access all of the piston cooling jets.Note: Ensure that the ball moves freely within the valve assembly of the piston cooling jet. Check that the tube of the piston cooling jet is not damaged.
If necessary, remove hollow dowel (3) from the cylinder block. Note: Hollow dowel (3) is used to locate the piston cooling jet.
Repeat Steps 1 through 3 for the removal of the remaining piston cooling jets. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00606467
Illustration 4 g00938243
If necessary, install hollow dowel (3) in the cylinder block.
Install piston cooling jet (2) to the cylinder block. Note: Ensure that piston cooling jet (2) is properly located on hollow dowel (3). Refer to the Specifications Manual, "Piston Cooling Jet" for the correct procedure for the alignment of the piston cooling jet.
Install valve assembly (1) into the piston cooling jet (2). Tighten the banjo bolt of the valve assembly (1) to a torque of 27 N m (20 lb ft).
Repeat Steps 1 through 3 for the installation of the remaining piston cooling jets. End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00938243
Illustration 2 g00606467
Remove valve assembly (1) from piston cooling jet (2).
Remove piston cooling jet (2) from the cylinder block. Note: The engine crankshaft may be rotated in order to access all of the piston cooling jets.Note: Ensure that the ball moves freely within the valve assembly of the piston cooling jet. Check that the tube of the piston cooling jet is not damaged.
If necessary, remove hollow dowel (3) from the cylinder block. Note: Hollow dowel (3) is used to locate the piston cooling jet.
Repeat Steps 1 through 3 for the removal of the remaining piston cooling jets. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00606467
Illustration 4 g00938243
If necessary, install hollow dowel (3) in the cylinder block.
Install piston cooling jet (2) to the cylinder block. Note: Ensure that piston cooling jet (2) is properly located on hollow dowel (3). Refer to the Specifications Manual, "Piston Cooling Jet" for the correct procedure for the alignment of the piston cooling jet.
Install valve assembly (1) into the piston cooling jet (2). Tighten the banjo bolt of the valve assembly (1) to a torque of 27 N m (20 lb ft).
Repeat Steps 1 through 3 for the installation of the remaining piston cooling jets. End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Cat SIS web machinery list:
Parts retainer Caterpillar catalog:
322C, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 330C, 330C L, 330D L, 330D LN, 345B II, 345C, 345C L, 345D L, 980G II, 980H, 980M, 988G, 988H
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 568 FM LL, M330D, W345C MH
320 L, 322 FM L, 325, 325 LN, 330, 330 FM L, 330 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, W345C MH
D9R, D9T
D9N, D9R, D9T
375, 854G, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9R, D9T
374D L, D11N, D11R, D11T, D9L
D9R, D9T
D10, D11N, D11R, D11T
854G, 854K, D11N, D11R, D11T
814S, 824S, 854G, 854K, D10N, D10R, D10T, D10T2, D11N, D11R, D11T
D10N, D10R, D10T, D10T2, D8L, D9L, D9N, D9R, D9T
2238483
RETAINER
D6R III
D6R III
2519829
RETAINER
D6R, D6R III, D6R STD, D6T, D6T LGP, D6T XL
D6R, D6R III, D6R STD, D6T, D6T LGP, D6T XL
D6R, D6R III, D6R STD, D6T, D6T LGP, D6T XL
2639950
RETAINER
D6R III, D6T, D7E, D7E LGP, D7R II
D6R III, D6T, D7E, D7E LGP, D7R II
527, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL
2233279
RETAINER
527, D5R LGP, D6K2, D6K2 LGP, D6N, D6N LGP, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL
527, D5R LGP, D6K2, D6K2 LGP, D6N, D6N LGP, D6R III, D6T, D6T LGP, D6T LGPPAT, D6T XL
3960580
RETAINER
D6T
D6T
3726384
RETAINER
D6R, D6R STD, D6T
D6R, D6R STD, D6T
3726383
RETAINER
D6R, D6R STD, D6T
D6R, D6R STD, D6T
2401866
RETAINER-SPRING
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 928HZ, 930G, 938H, 963D, IT38H
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 928HZ, 930G, 938H, 963D, IT38H
2982854
RETAINER
953D, 963D, 973D
953D, 963D, 973D