RETAINER 3398808 - Caterpillar

3398808 RETAINER Caterpillar parts D9T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3398808
339-8808
3398808

Weight: 36 pounds 16 kg.

Buy RETAINER 3398808 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 3398808:

TRACK-TYPE TRACTOR D9T Caterpillar

Number on catalog scheme: 19

Caterpillar 3398808 Parts scheme RETAINER

For full view, you need register

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
C 1P-0510 Driver Group 1
D 138-9299 (1) Oil Seal Tool 1
E 139-0088 (1) Seal Tool 1
E 325-5756 (2) Seal Installer 1
F 4C-9500 Quick Cure Primer 1
( 1 ) Use with a 19.1 mm (0.75 inch) shaft
( 2 ) Use with a 25.4 mm (1.00 inch) shaft
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01163722
Use Tooling (F) to clean shaft (10) and the counterbore for oil seal (5) in housing (4) .
Use Tooling (C) to install a new oil seal (5) in housing (4) . Install the seal with the part number on the metal face of the seal toward the housing. Ensure that the oil seal is flush with the front edge of the counterbore of the housing. Do not lubricate the oil seal.
Install bearing cone (6) on shaft (10) .
Position bearing retainer (8) with "this side out" markings toward the gear end of shaft (10) . Install gear (15) . Install washer (12) and bolt (13) on shaft (10) . Tighten bolt (13) to a torque of 215 40 N m (159 30 lb ft).
Slide Tooling (D) over shaft (10) . The tapered edge will be facing outward.
Install the gear and shaft assembly into housing (4) . Use care not to damage the oil seal. Install bolts (14) that hold bearing retainer (8) to the housing.
Remove Tooling (D) from shaft (10) .
Use Tooling (E) and a suitable press to install a new seal (2) over shaft (10) and into housing (4) . Ensure that the outer shell of the seal is fully seated in the housing.
Position impeller (3) on shaft (10) . Install washer (9) and bolt (11) . Tighten the bolt to a torque of 39 3 N m (29 2 lb ft).
Install a new O-ring seal on the outside of adapter (1) . Lightly lubricate the seal with clean engine oil.
Install a new O-ring seal (7) on adapter (1) .
Position adapter (1) on housing (4) .
Install a new O-ring seal (16) in housing (4) .End By: Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

DV232 Track Type Tractor NJH00001-UP (MACHINE) POWERED BY C18 Engine

339-8807: BRAKE GP-SERVICE & PARKING » M01013330323

D9T TRACK-TYPE TRACTOR TWG00001-UP (MACHINE) POWERED BY C18 Engine

339-8807: BRAKE GP-SERVICE & PARKING » SEBP58000704

D9T TRACK-TYPE TRACTOR REX00001-UP (MACHINE) POWERED BY C18 Engine

339-8807: BRAKE GP-SERVICE & PARKING » SEBP72010822

Parts retainer Caterpillar catalog:

1361107 RETAINER
16G, 16H NA, 24H, 24M, 3126, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3516, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C...

2302569 RETAINER-PIN
24M, 3412D, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651B, 657E, 657G, 73...

2502940 RETAINER-PIN
24M, 323D L, 323D2 L, 330D L, 336D L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 637D,...

8E3124 RETAINER
589, D10N, D10R, D10T, D10T2, D8L, D9N, D9R, D9T

6P8829 RETAINER
578, 583K, 589, 594H, 8U, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D8H, D8K, D8L, D9G, D9H, D9L, D9N, D9R, D9T

6J5179 RETAINER
834G, 834H, 834K, 844, 844H, 844K, 8U, D8L, D8N, D8R, D8R II, D8T, D9N, D9R, D9T

8E4743 RETAINER-G.E.T.
320D, 320D GC, 320D L, 320D LRR, 320D RR, 322B L, 325B L, 330B L, 375 L, 950H, 962H, 994, 994D, D8N, D8R, D8R II, D8T, D9N, D9R, D9T