RETAINER 3744846 - Caterpillar

Keep a close watch for leaks. If leaking is observed, find the source and correct the leak. Check the fluid levels more frequently than the recommended periods if leaking is suspected or observed. 1. Inspect all attachments for damage or excessive wear. Repair if damaged.2. Inspect attachment cylinders and linkage for damage or excessive wear. Repair if damaged.3. Inspect the lights for broken bulbs and lenses. Replace if broken. 4. Inspect and remove any trash build up in the engine compartment. Also remove any dirt build up on top of the crankcase guard.5. Inspect the cooling system for leaks faulty hoses and trash build up. Correct any leaks and remove any trash from the radiator.6. Inspect the engine precleaner screen for dirt build up. Remove any dirt or debris. 7. Inspect and repair any engine compartment leaks. Check around all seals and covers.8. Inspect the steps and handholds for their condition and cleanliness. Inspect the Rollover Protective Structure (ROPS), and the Falling Object Protective Structure (FOPS) for damage. If repair is necessary contact your Caterpillar dealer. Tighten any loose ROPS or FOPS bolts. 9. Inspect and repair any hydraulic system leaks. Inspect hoses, seals and around flanges.10. Inspect the differentials and final drives under the machine for leaks. 11. Be sure covers and guards are firmly in place. Inspect for damage or for loose and missing bolts.12. Inspect transmission for leaks.13. Inspect and repair damaged and excessively worn tracks. Tighten any loose bolts and replace any that are missing. 14. Inspect operator's compartment for cleanliness and remove all trash and dirt build up. 15. Visually inspect the tracks. Check for wear and excessive dirt build up on track components.If track appears to be too tight or too loose, see the topic Tracks under Every 250 Service Hours or Monthly in the Maintenance Section of this manual. 16. Make sure the horn, back-up alarm, lights, guards, shield, etc., are in proper working order.Seat Belt
Inspect for Wear or Damage
Seat belt and mounting hardware must be inspected for wear or damage before operating the machine. Replace the belt or mounting hardware if worn or damaged. Replace the seat belt after three years of usage, regardless of appearance.Engine Crankcase Oil
Check Oil Level
Do not overfill the crankcase. Engine damage can result.
1. Open the access cover located on the left side of the machine. 2. Maintain the oil level between the marks on dipstick (1) with the engine running.Maintain the oil level between the ADD