RETAINER 3886647 - Caterpillar

Connection Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0412 Clevis 1
B 1U-9200 Lever Puller Hoist 1
138-7574 Link Bracket 1 Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01428872
Illustration 2 g01429093
Attach Tooling (A), Tooling (B), and a suitable lifting device to torque converter (1). The weight of torque converter (1) is approximately 1996 kg (4400 lb).
Install O-ring seals (3).
Illustration 3 g01428873
Position torque converter (1) onto the engine and install bolts (2). End By:
Install the engine and the torque converter. Refer to Disassembly and Assembly, "Engine and Torque Converter - Install".