RETAINER-VALVE 4349836 - Caterpillar

Illustration 1 g01567153 (1) Torque for six screws ... 0.5 0.1 N m (4 1 lb in)Note: Before assembly, lubricate the threads of the nut with the lubricant that is being sealed. (2) Torque for the nut ... 85 5 N m (65 4 lb ft)Note: Before assembly, lubricate the threads of the plug with the lubricant that is being sealed. (3) Torque for two plugs ... 60 6 N m (44 4 lb ft) (4) Apply the lubricant that is being sealed to two seals. Note: Before assembly, lubricate the threads of the plug with the lubricant that is being sealed. (5) Torque for the plug ... 24 2 N m (18 1 lb ft) (6) Before assembly, lubricate two seals with the lubricant that is being sealed. (7) Use the following procedure to tighten the bolt:
Tighten the bolt to 5 N m (45 lb in).
Rotate the bolt for an angle of 19 1 degrees.
Final torque for the bolt must be 12 3 N m (105 27 lb in).
Illustration 2 g01621887 (8) Torque for two plugs ... 40 3 N m (30 2 lb ft) (9) Torque for the bolt ... 12 3 N m (105 27 lb in)Note: Before assembly, lubricate the threads of the bolt (10) with the lubricant that is being sealed. (10) Torque for the bolt ... 9 1 N m (80 9 lb in) (11) Torque for five bolts ... 30 2 N m (22 1 lb ft) (12) Use the following procedure to tighten four bolts:
Tighten bolts to 5 N m (45 lb in).
Rotate bolts for an angle of 32 1 degrees.
Final torque for bolts must be 15 5 N m (11 4 lb ft).
Illustration 3 g01568373 (13) Torque for the connector ... 25.0 2.5 N m (18 2 lb ft) (14) Torque for the connector ... 25.0 2.5 N m (18 2 lb ft) (15) Torque for the connector ... 25.0 2.5 N m (18 2 lb ft) (16) Torque for the connector ... 25.0 2.5 N m (18 2 lb ft)