RETAINER-BEA 4563679 - Caterpillar

Parking Brake - Power Shift
Parking Brake - This lever engages the parking brake and locks the transmission lever in NEUTRAL. The machine should not move when engaged. Do not use for stopping the machine. Locked - Push the lever down to engage the parking brake. This also locks the transmission lever in NEUTRAL. Unlocked - Pull the lever up to release the parking brake.Parking Brake - Direct Drive
Parking Brake - This knob engages the parking brake and locks the transmission lever in NEUTRAL. The machine should not move when engaged. Do not use for stopping the machine. Locked - Pull the knob up to engage the parking brake. This also locks the transmission lever in NEUTRAL. Unlocked - Push the knob down to release the parking brake.Brake Pedal
Brake Pedal Applied - Push the brake pedal down to apply the brakes, and slow or stop the machine. Use the brakes on a downgrade to keep the engine from overspeeding. Brake Pedal Released - Release the brake pedal to allow the machine to move, or increase ground speed.Governor and Decelerator
Governor Lever - Pull the lever back for higher engine rpm. Push the lever forward to slow the engine. Push the lever forward to the detent position for LOW IDLE. Push the lever all the way forward through the detent to stop the engine. Decelerator Pedal (If Equipped) - Push down on the pedal to override the governor control and reduce the engine speed. Use the pedal to reduce engine rpm when making directional shifts.Transmission Control - Power Shift
Transmission Direction and Speed Selector - This lever controls transmission NEUTRAL (N) and three speeds each forward (F) and reverse (R). Move the lever to the desired direction and speed to operate the machine.Transmission and Clutch - Direct Drive
Transmission Direction Control Lever - The transmission control lever is located at the left side of the operator's seat. The lever controls the transmission direction selection. Forward (1) - Push the transmission lever forward. The machine moves forward. Neutral (2) - The machine should not move when the lever is in NEUTRAL. Reverse (3) - Pull the transmission lever toward the operator. The machine moves in reverse. Transmission Speed Control Lever - The transmission control lever is located in front of the operator's seat. It controls the transmission speed selection for the forward and reverse speeds of the machine. Speed Selection - Position the transmission directional control lever in the desired direction of travel. Move the lever to the desired speed according to the shift pattern on the selector lever knob.Flywheel Clutch
Flywheel Clutch Pedal - The