RETAINER 4N0776 - Caterpillar

There may be several specific safety signs on your engine. The exact location and a description of the safety signs are reviewed in this section. Please become familiar with all safety signs.Ensure that all of the safety signs are legible. Clean the safety signs or replace the safety signs if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety signs. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety signs. The safety signs that are loosened could drop off of the engine.Replace any safety sign that is damaged or missing. If a safety sign is attached to a part of the engine that is replaced, install a new safety sign on the replacement part. Your Caterpillar dealer can provide new safety signs.
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Servicing the Engine and Reading the Manual
Illustration 1 g00329090
Locations of the warning label for servicing the engine and reading the manualThe warning label for servicing the engine and reading the manual is located on the following components: terminal box (1), customer connection box (2) and circuit breaker box (3) .
g00308764Do not operate or work on the engine unless the instruction and warnings in the Operation and Maintenance Manual are understood. Failure to follow the instructions or failure to heed the warnings could result in personal injury or death. Proper care is your responsibility.Coolant Pressure and Hot Surface
Illustration 2 g00309883
Location of the warning label for coolant pressure and hot surfaceThe warning label for coolant pressure is located near the top of the radiator.
g00107971When the engine is at operating temperature, the engine coolant is hot. The engine coolant is also under pressure.Allow cooling system components to cool before the cooling system is drained. Any contact with hot coolant or with steam can cause severe burns.Electrical Distribution (Generator)
Illustration 3 g00728236
(1) Warning label on the access door for the load cable (2) Warning label on the generator coverThe warning label (1) for electrical distribution (generator) is located on the access door of the load cable. The warning label (2) for electrical distribution (generator) is also located on the cover of the generator.
g00296980
Do not connect generator to a utility electrical distribution system unless it is isolated from the system. Electrical feedback into the distribution system can occur and could cause personal injury or death.Open and secure main distribution system switch, or if the connection is permanent, install a double throw transfer switch to prevent electrical feedback. Some generators are specifically approved by a utility to run in parallel with the distribution system and isolation may not be required. Always check with your utility as to the applicable circumstances.
Electrical Shock
Illustration