RETAINER 5291724 - Caterpillar

Removal Procedure
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Illustration 1 g01176341
Disconnect harness assemblies (1) for the lights, if equipped.
Remove the cable straps to the front frame.
Illustration 2 g01176344
Attach a suitable lifting device to ROPS (2) .
Illustration 3 g01176958
Remove bolts (3) and ROPS (2) from the machine. The weight of ROPS (2) is approximately 380 kg (838 lb).Installation Procedure
Illustration 4 g01176344
Attach a suitable lifting device to ROPS (2) and install ROPS (2) on the machine. The weight of ROPS (2) is approximately 380 kg (838 lb).
Illustration 5 g01176958
Install bolts (3) and ROPS (2) .
Illustration 6 g01176341
Connect harness assemblies (1) for the lights, if equipped.
Attach cable straps to the machine, if equipped.